final class NonEmptyVector[+T] extends AnyVal
A non-empty list: an ordered, immutable, non-empty collection of elements with LinearSeq
performance characteristics.
The purpose of NonEmptyVector
is to allow you to express in a type that a Vector
is non-empty, thereby eliminating the
need for (and potential exception from) a run-time check for non-emptiness. For a non-empty sequence with IndexedSeq
performance, see Every
.
Constructing NonEmptyVector
s
You can construct a NonEmptyVector
by passing one or more elements to the NonEmptyVector.apply
factory method:
scala> NonEmptyVector(1, 2, 3) res0: org.scalactic.anyvals.NonEmptyVector[Int] = NonEmptyVector(1, 2, 3)
Alternatively you can cons elements onto the End
singleton object, similar to making a Vector
starting with Nil
:
scala> 1 :: 2 :: 3 :: Nil res0: Vector[Int] = Vector(1, 2, 3)
scala> 1 :: 2 :: 3 :: End res1: org.scalactic.NonEmptyVector[Int] = NonEmptyVector(1, 2, 3)
Note that although Nil
is a Vector[Nothing]
, End
is
not a NonEmptyVector[Nothing]
, because no empty NonEmptyVector
exists. (A non-empty list is a series
of connected links; if you have no links, you have no non-empty list.)
scala> val nil: Vector[Nothing] = Nil nil: Vector[Nothing] = Vector()
scala> val nada: NonEmptyVector[Nothing] = End <console>:16: error: type mismatch; found : org.scalactic.anyvals.End.type required: org.scalactic.anyvals.NonEmptyVector[Nothing] val nada: NonEmptyVector[Nothing] = End ^
Working with NonEmptyVector
s
NonEmptyVector
does not extend Scala's Seq
or Traversable
traits because these require that
implementations may be empty. For example, if you invoke tail
on a Seq
that contains just one element,
you'll get an empty Seq
:
scala> Vector(1).tail res6: Vector[Int] = Vector()
On the other hand, many useful methods exist on Seq
that when invoked on a non-empty Seq
are guaranteed
to not result in an empty Seq
. For convenience, NonEmptyVector
defines a method corresponding to every such Seq
method. Here are some examples:
NonEmptyVector(1, 2, 3).map(_ + 1) // Result: NonEmptyVector(2, 3, 4) NonEmptyVector(1).map(_ + 1) // Result: NonEmptyVector(2) NonEmptyVector(1, 2, 3).containsSlice(NonEmptyVector(2, 3)) // Result: true NonEmptyVector(1, 2, 3).containsSlice(NonEmptyVector(3, 4)) // Result: false NonEmptyVector(-1, -2, 3, 4, 5).minBy(_.abs) // Result: -1
NonEmptyVector
does not currently define any methods corresponding to Seq
methods that could result in
an empty Seq
. However, an implicit converison from NonEmptyVector
to Vector
is defined in the NonEmptyVector
companion object that will be applied if you attempt to call one of the missing methods. As a
result, you can invoke filter
on an NonEmptyVector
, even though filter
could result
in an empty sequence—but the result type will be Vector
instead of NonEmptyVector
:
NonEmptyVector(1, 2, 3).filter(_ < 10) // Result: Vector(1, 2, 3) NonEmptyVector(1, 2, 3).filter(_ > 10) // Result: Vector()
You can use NonEmptyVector
s in for
expressions. The result will be an NonEmptyVector
unless
you use a filter (an if
clause). Because filters are desugared to invocations of filter
, the
result type will switch to a Vector
at that point. Here are some examples:
scala> import org.scalactic.anyvals._ import org.scalactic.anyvals._ scala> for (i <- NonEmptyVector(1, 2, 3)) yield i + 1 res0: org.scalactic.anyvals.NonEmptyVector[Int] = NonEmptyVector(2, 3, 4) scala> for (i <- NonEmptyVector(1, 2, 3) if i < 10) yield i + 1 res1: Vector[Int] = Vector(2, 3, 4) scala> for { | i <- NonEmptyVector(1, 2, 3) | j <- NonEmptyVector('a', 'b', 'c') | } yield (i, j) res3: org.scalactic.anyvals.NonEmptyVector[(Int, Char)] = NonEmptyVector((1,a), (1,b), (1,c), (2,a), (2,b), (2,c), (3,a), (3,b), (3,c)) scala> for { | i <- NonEmptyVector(1, 2, 3) if i < 10 | j <- NonEmptyVector('a', 'b', 'c') | } yield (i, j) res6: Vector[(Int, Char)] = Vector((1,a), (1,b), (1,c), (2,a), (2,b), (2,c), (3,a), (3,b), (3,c))
- T
the type of elements contained in this
NonEmptyVector
- Source
- NonEmptyVector.scala
- Alphabetic
- By Inheritance
- NonEmptyVector
- AnyVal
- Any
- Hide All
- Show All
- Public
- Protected
Value Members
- final def !=(arg0: Any): Boolean
- Definition Classes
- Any
- final def ##(): Int
- Definition Classes
- Any
- def ++[U >: T](other: GenTraversableOnce[U]): NonEmptyVector[U]
Returns a new
NonEmptyVector
containing the elements of thisNonEmptyVector
followed by the elements of the passedGenTraversableOnce
.Returns a new
NonEmptyVector
containing the elements of thisNonEmptyVector
followed by the elements of the passedGenTraversableOnce
. The element type of the resultingNonEmptyVector
is the most specific superclass encompassing the element types of thisNonEmptyVector
and the passedGenTraversableOnce
.- U
the element type of the returned
NonEmptyVector
- other
the
GenTraversableOnce
to append- returns
a new
NonEmptyVector
that contains all the elements of thisNonEmptyVector
followed by all elements ofother
.
- def ++[U >: T](other: Every[U]): NonEmptyVector[U]
Returns a new
NonEmptyVector
containing the elements of thisNonEmptyVector
followed by the elements of the passedEvery
.Returns a new
NonEmptyVector
containing the elements of thisNonEmptyVector
followed by the elements of the passedEvery
. The element type of the resultingNonEmptyVector
is the most specific superclass encompassing the element types of thisNonEmptyVector
and the passedEvery
.- U
the element type of the returned
NonEmptyVector
- other
the
Every
to append- returns
a new
NonEmptyVector
that contains all the elements of thisNonEmptyVector
followed by all elements ofother
.
- def ++[U >: T](other: NonEmptyVector[U]): NonEmptyVector[U]
Returns a new
NonEmptyVector
containing the elements of thisNonEmptyVector
followed by the elements of the passedNonEmptyVector
.Returns a new
NonEmptyVector
containing the elements of thisNonEmptyVector
followed by the elements of the passedNonEmptyVector
. The element type of the resultingNonEmptyVector
is the most specific superclass encompassing the element types of this and the passedNonEmptyVector
.- U
the element type of the returned
NonEmptyVector
- other
the
NonEmptyVector
to append- returns
a new
NonEmptyVector
that contains all the elements of thisNonEmptyVector
followed by all elements ofother
.
- final def +:[U >: T](element: U): NonEmptyVector[U]
Returns a new
NonEmptyVector
with the given element prepended.Returns a new
NonEmptyVector
with the given element prepended.Note that :-ending operators are right associative. A mnemonic for
+:
vs.:+
is: the COLon goes on the COLlection side.- element
the element to prepend to this
NonEmptyVector
- returns
a new
NonEmptyVector
consisting ofelement
followed by all elements of thisNonEmptyVector
.
- def :+[U >: T](element: U): NonEmptyVector[U]
Returns a new
NonEmptyVector
with the given element appended.Returns a new
NonEmptyVector
with the given element appended.Note a mnemonic for
+:
vs.:+
is: the COLon goes on the COLlection side.- element
the element to append to this
NonEmptyVector
- returns
a new
NonEmptyVector
consisting of all elements of thisNonEmptyVector
followed byelement
.
- final def ::[U >: T](element: U): NonEmptyVector[U]
Adds an element to the beginning of this
NonEmptyVector
.Adds an element to the beginning of this
NonEmptyVector
.Note that :-ending operators are right associative. A mnemonic for
+:
vs.:+
is: the COLon goes on the COLlection side.- element
the element to prepend to this
NonEmptyVector
- returns
a
NonEmptyVector
that containselement
as first element and that continues with thisNonEmptyVector
.
- final def ==(arg0: Any): Boolean
- Definition Classes
- Any
- final def addString(sb: StringBuilder, start: String, sep: String, end: String): StringBuilder
Appends all elements of this
NonEmptyVector
to a string builder using start, end, and separator strings.Appends all elements of this
NonEmptyVector
to a string builder using start, end, and separator strings. The written text will consist of a concatenation of the stringstart
; the result of invokingtoString
on all elements of thisNonEmptyVector
, separated by the stringsep
; and the stringend
- sb
the string builder to which elements will be appended
- start
the ending string
- sep
the separator string
- returns
the string builder,
sb
, to which elements were appended.
- final def addString(sb: StringBuilder, sep: String): StringBuilder
Appends all elements of this
NonEmptyVector
to a string builder using a separator string.Appends all elements of this
NonEmptyVector
to a string builder using a separator string. The written text will consist of a concatenation of the result of invokingtoString
on of every element of thisNonEmptyVector
, separated by the stringsep
.- sb
the string builder to which elements will be appended
- sep
the separator string
- returns
the string builder,
sb
, to which elements were appended.
- final def addString(sb: StringBuilder): StringBuilder
Appends all elements of this
NonEmptyVector
to a string builder.Appends all elements of this
NonEmptyVector
to a string builder. The written text will consist of a concatenation of the result of invokingtoString
on of every element of thisNonEmptyVector
, without any separator string.- sb
the string builder to which elements will be appended
- returns
the string builder,
sb
, to which elements were appended.
- final def apply(idx: Int): T
Selects an element by its index in the
NonEmptyVector
.Selects an element by its index in the
NonEmptyVector
.- returns
the element of this
NonEmptyVector
at indexidx
, where 0 indicates the first element.
- final def asInstanceOf[T0]: T0
- Definition Classes
- Any
- final def collectFirst[U](pf: PartialFunction[T, U]): Option[U]
Finds the first element of this
NonEmptyVector
for which the given partial function is defined, if any, and applies the partial function to it.Finds the first element of this
NonEmptyVector
for which the given partial function is defined, if any, and applies the partial function to it.- pf
the partial function
- returns
an
Option
containingpf
applied to the first element for which it is defined, orNone
if the partial function was not defined for any element.
- final def contains(elem: Any): Boolean
Indicates whether this
NonEmptyVector
contains a given value as an element.Indicates whether this
NonEmptyVector
contains a given value as an element.- elem
the element to look for
- returns
true if this
NonEmptyVector
has an element that is equal (as determined by==)
toelem
, false otherwise.
- final def containsSlice[B](that: NonEmptyVector[B]): Boolean
Indicates whether this
NonEmptyVector
contains a givenNonEmptyVector
as a slice.Indicates whether this
NonEmptyVector
contains a givenNonEmptyVector
as a slice.- that
the
NonEmptyVector
slice to look for- returns
true if this
NonEmptyVector
contains a slice with the same elements asthat
, otherwisefalse
.
- final def containsSlice[B](that: Every[B]): Boolean
Indicates whether this
NonEmptyVector
contains a givenEvery
as a slice.Indicates whether this
NonEmptyVector
contains a givenEvery
as a slice.- that
the
Every
slice to look for- returns
true if this
NonEmptyVector
contains a slice with the same elements asthat
, otherwisefalse
.
- final def containsSlice[B](that: GenSeq[B]): Boolean
Indicates whether this
NonEmptyVector
contains a givenGenSeq
as a slice.Indicates whether this
NonEmptyVector
contains a givenGenSeq
as a slice.- that
the
GenSeq
slice to look for- returns
true if this
NonEmptyVector
contains a slice with the same elements asthat
, otherwisefalse
.
- final def copyToArray[U >: T](arr: Array[U], start: Int, len: Int): Unit
Copies values of this
NonEmptyVector
to an array.Copies values of this
NonEmptyVector
to an array. Fills the given arrayarr
with at mostlen
elements of thisNonEmptyVector
, beginning at indexstart
. Copying will stop once either the end of the currentNonEmptyVector
is reached, the end of the array is reached, orlen
elements have been copied.- arr
the array to fill
- start
the starting index
- len
the maximum number of elements to copy
- final def copyToArray[U >: T](arr: Array[U], start: Int): Unit
Copies values of this
NonEmptyVector
to an array.Copies values of this
NonEmptyVector
to an array. Fills the given arrayarr
with values of thisNonEmptyVector
, beginning at indexstart
. Copying will stop once either the end of the currentNonEmptyVector
is reached, or the end of the array is reached.- arr
the array to fill
- start
the starting index
- final def copyToArray[U >: T](arr: Array[U]): Unit
Copies values of this
NonEmptyVector
to an array.Copies values of this
NonEmptyVector
to an array. Fills the given arrayarr
with values of thisNonEmptyVector
. Copying will stop once either the end of the currentNonEmptyVector
is reached, or the end of the array is reached.- arr
the array to fill
- final def copyToBuffer[U >: T](buf: Buffer[U]): Unit
Copies all elements of this
NonEmptyVector
to a buffer.Copies all elements of this
NonEmptyVector
to a buffer.- buf
the buffer to which elements are copied
- final def corresponds[B](that: NonEmptyVector[B])(p: (T, B) => Boolean): Boolean
Indicates whether every element of this
NonEmptyVector
relates to the corresponding element of a givenNonEmptyVector
by satisfying a given predicate.Indicates whether every element of this
NonEmptyVector
relates to the corresponding element of a givenNonEmptyVector
by satisfying a given predicate.- B
the type of the elements of
that
- that
the
NonEmptyVector
to compare for correspondence- p
the predicate, which relates elements from this and the passed
NonEmptyVector
- returns
true if this and the passed
NonEmptyVector
have the same length andp(x, y)
istrue
for all corresponding elementsx
of thisNonEmptyVector
andy
of that, otherwisefalse
.
- final def corresponds[B](that: Every[B])(p: (T, B) => Boolean): Boolean
Indicates whether every element of this
NonEmptyVector
relates to the corresponding element of a givenEvery
by satisfying a given predicate.Indicates whether every element of this
NonEmptyVector
relates to the corresponding element of a givenEvery
by satisfying a given predicate.- B
the type of the elements of
that
- that
the
Every
to compare for correspondence- p
the predicate, which relates elements from this
NonEmptyVector
and the passedEvery
- returns
true if this
NonEmptyVector
and the passedEvery
have the same length andp(x, y)
istrue
for all corresponding elementsx
of thisNonEmptyVector
andy
of that, otherwisefalse
.
- final def corresponds[B](that: GenSeq[B])(p: (T, B) => Boolean): Boolean
Indicates whether every element of this
NonEmptyVector
relates to the corresponding element of a givenGenSeq
by satisfying a given predicate.Indicates whether every element of this
NonEmptyVector
relates to the corresponding element of a givenGenSeq
by satisfying a given predicate.- B
the type of the elements of
that
- that
the
GenSeq
to compare for correspondence- p
the predicate, which relates elements from this
NonEmptyVector
and the passedGenSeq
- returns
true if this
NonEmptyVector
and the passedGenSeq
have the same length andp(x, y)
istrue
for all corresponding elementsx
of thisNonEmptyVector
andy
of that, otherwisefalse
.
- final def count(p: (T) => Boolean): Int
Counts the number of elements in this
NonEmptyVector
that satisfy a predicate.Counts the number of elements in this
NonEmptyVector
that satisfy a predicate.- p
the predicate used to test elements.
- returns
the number of elements satisfying the predicate
p
.
- final def distinct: NonEmptyVector[T]
Builds a new
NonEmptyVector
from thisNonEmptyVector
without any duplicate elements.Builds a new
NonEmptyVector
from thisNonEmptyVector
without any duplicate elements.- returns
A new
NonEmptyVector
that contains the first occurrence of every element of thisNonEmptyVector
.
- final def endsWith[B](that: NonEmptyVector[B]): Boolean
Indicates whether this
NonEmptyVector
ends with the givenNonEmptyVector
.Indicates whether this
NonEmptyVector
ends with the givenNonEmptyVector
.- that
the
NonEmptyVector
to test- returns
true
if thisNonEmptyVector
hasthat
as a suffix,false
otherwise.
- final def endsWith[B](that: Every[B]): Boolean
Indicates whether this
NonEmptyVector
ends with the givenEvery
.Indicates whether this
NonEmptyVector
ends with the givenEvery
.- that
the
Every
to test- returns
true
if thisNonEmptyVector
hasthat
as a suffix,false
otherwise.
- final def endsWith[B](that: GenSeq[B]): Boolean
Indicates whether this
NonEmptyVector
ends with the givenGenSeq
.Indicates whether this
NonEmptyVector
ends with the givenGenSeq
.- that
the sequence to test
- returns
true
if thisNonEmptyVector
hasthat
as a suffix,false
otherwise.
- final def exists(p: (T) => Boolean): Boolean
Indicates whether a predicate holds for at least one of the elements of this
NonEmptyVector
.Indicates whether a predicate holds for at least one of the elements of this
NonEmptyVector
.- returns
true
if the given predicatep
holds for some of the elements of thisNonEmptyVector
, otherwisefalse
.
- final def find(p: (T) => Boolean): Option[T]
Finds the first element of this
NonEmptyVector
that satisfies the given predicate, if any.Finds the first element of this
NonEmptyVector
that satisfies the given predicate, if any.- p
the predicate used to test elements
- returns
an
Some
containing the first element in thisNonEmptyVector
that satisfiesp
, orNone
if none exists.
- final def flatMap[U](f: (T) => NonEmptyVector[U]): NonEmptyVector[U]
Builds a new
NonEmptyVector
by applying a function to all elements of thisNonEmptyVector
and using the elements of the resultingNonEmptyVector
s.Builds a new
NonEmptyVector
by applying a function to all elements of thisNonEmptyVector
and using the elements of the resultingNonEmptyVector
s.- U
the element type of the returned
NonEmptyVector
- f
the function to apply to each element.
- returns
a new
NonEmptyVector
containing elements obtained by applying the given functionf
to each element of thisNonEmptyVector
and concatenating the elements of resultingNonEmptyVector
s.
- final def flatten[B](implicit ev: <:<[T, NonEmptyVector[B]]): NonEmptyVector[B]
Converts this
NonEmptyVector
ofNonEmptyVector
s into aNonEmptyVector
formed by the elements of the nestedNonEmptyVector
s.Converts this
NonEmptyVector
ofNonEmptyVector
s into aNonEmptyVector
formed by the elements of the nestedNonEmptyVector
s.Note: You cannot use this
flatten
method on aNonEmptyVector
that contains aGenTraversableOnce
s, because if all the nestedGenTraversableOnce
s were empty, you'd end up with an emptyNonEmptyVector
.- returns
a new
NonEmptyVector
resulting from concatenating all nestedNonEmptyVector
s.
- final def fold[U >: T](z: U)(op: (U, U) => U): U
Folds the elements of this
NonEmptyVector
using the specified associative binary operator.Folds the elements of this
NonEmptyVector
using the specified associative binary operator.The order in which operations are performed on elements is unspecified and may be nondeterministic.
- U
a type parameter for the binary operator, a supertype of T.
- z
a neutral element for the fold operation; may be added to the result an arbitrary number of times, and must not change the result (e.g.,
Nil
for list concatenation, 0 for addition, or 1 for multiplication.)- op
a binary operator that must be associative
- returns
the result of applying fold operator
op
between all the elements andz
- final def foldLeft[B](z: B)(op: (B, T) => B): B
Applies a binary operator to a start value and all elements of this
NonEmptyVector
, going left to right.Applies a binary operator to a start value and all elements of this
NonEmptyVector
, going left to right.- B
the result type of the binary operator.
- z
the start value.
- op
the binary operator.
- returns
the result of inserting
op
between consecutive elements of thisNonEmptyVector
, going left to right, with the start value,z
, on the left:op(...op(op(z, x_1), x_2), ..., x_n)
where x_{1}, ..., x_{n} are the elements of thisNonEmptyVector
.
- final def foldRight[B](z: B)(op: (T, B) => B): B
Applies a binary operator to all elements of this
NonEmptyVector
and a start value, going right to left.Applies a binary operator to all elements of this
NonEmptyVector
and a start value, going right to left.- B
the result of the binary operator
- z
the start value
- op
the binary operator
- returns
the result of inserting
op
between consecutive elements of thisNonEmptyVector
, going right to left, with the start value,z
, on the right:op(x_1, op(x_2, ... op(x_n, z)...))
where x_{1}, ..., x_{n} are the elements of thisNonEmptyVector
.
- final def forall(p: (T) => Boolean): Boolean
Indicates whether a predicate holds for all elements of this
NonEmptyVector
.Indicates whether a predicate holds for all elements of this
NonEmptyVector
.- p
the predicate used to test elements.
- returns
true
if the given predicatep
holds for all elements of thisNonEmptyVector
, otherwisefalse
.
- final def foreach(f: (T) => Unit): Unit
Applies a function
f
to all elements of thisNonEmptyVector
.Applies a function
f
to all elements of thisNonEmptyVector
.- f
the function that is applied for its side-effect to every element. The result of function
f
is discarded.
- def getClass(): Class[_ <: AnyVal]
- Definition Classes
- AnyVal → Any
- final def groupBy[K](f: (T) => K): Map[K, NonEmptyVector[T]]
Partitions this
NonEmptyVector
into a map ofNonEmptyVector
s according to some discriminator function.Partitions this
NonEmptyVector
into a map ofNonEmptyVector
s according to some discriminator function.- K
the type of keys returned by the discriminator function.
- f
the discriminator function.
- returns
A map from keys to
NonEmptyVector
s such that the following invariant holds:(nonEmptyVector.toVector partition f)(k) = xs filter (x => f(x) == k)
That is, every keyk
is bound to aNonEmptyVector
of those elementsx
for whichf(x)
equalsk
.
- final def grouped(size: Int): Iterator[NonEmptyVector[T]]
Partitions elements into fixed size
NonEmptyVector
s.Partitions elements into fixed size
NonEmptyVector
s.- size
the number of elements per group
- returns
An iterator producing
NonEmptyVector
s of sizesize
, except the last will be truncated if the elements don't divide evenly.
- final def hasDefiniteSize: Boolean
Returns
true
to indicate thisNonEmptyVector
has a definite size, since allNonEmptyVector
s are strict collections. - final def head: T
Selects the first element of this
NonEmptyVector
.Selects the first element of this
NonEmptyVector
.- returns
the first element of this
NonEmptyVector
.
- final def headOption: Option[T]
Selects the first element of this
NonEmptyVector
and returns it wrapped in aSome
.Selects the first element of this
NonEmptyVector
and returns it wrapped in aSome
.- returns
the first element of this
NonEmptyVector
, wrapped in aSome
.
- final def indexOf[U >: T](elem: U, from: Int): Int
Finds index of first occurrence of some value in this
NonEmptyVector
after or at some start index.Finds index of first occurrence of some value in this
NonEmptyVector
after or at some start index.- elem
the element value to search for.
- from
the start index
- returns
the index
>=
from
of the first element of thisNonEmptyVector
that is equal (as determined by==
) toelem
, or-1
, if none exists.
- final def indexOf[U >: T](elem: U): Int
Finds index of first occurrence of some value in this
NonEmptyVector
.Finds index of first occurrence of some value in this
NonEmptyVector
.- elem
the element value to search for.
- returns
the index of the first element of this
NonEmptyVector
that is equal (as determined by==
) toelem
, or-1
, if none exists.
- final def indexOfSlice[U >: T](that: NonEmptyVector[U], from: Int): Int
Finds first index after or at a start index where this
NonEmptyVector
contains a givenNonEmptyVector
as a slice.Finds first index after or at a start index where this
NonEmptyVector
contains a givenNonEmptyVector
as a slice.- that
the
NonEmptyVector
defining the slice to look for- from
the start index
- returns
the first index
>=
from
such that the elements of thisNonEmptyVector
starting at this index match the elements ofNonEmptyVector
that
, or-1
of no such subsequence exists.
- final def indexOfSlice[U >: T](that: Every[U], from: Int): Int
Finds first index after or at a start index where this
NonEmptyVector
contains a givenEvery
as a slice.Finds first index after or at a start index where this
NonEmptyVector
contains a givenEvery
as a slice.- that
the
Every
defining the slice to look for- from
the start index
- returns
the first index
>=
from
such that the elements of thisNonEmptyVector
starting at this index match the elements ofEvery
that
, or-1
of no such subsequence exists.
- final def indexOfSlice[U >: T](that: NonEmptyVector[U]): Int
Finds first index where this
NonEmptyVector
contains a givenNonEmptyVector
as a slice.Finds first index where this
NonEmptyVector
contains a givenNonEmptyVector
as a slice.- that
the
NonEmptyVector
defining the slice to look for- returns
the first index such that the elements of this
NonEmptyVector
starting at this index match the elements ofNonEmptyVector
that
, or-1
of no such subsequence exists.
- final def indexOfSlice[U >: T](that: Every[U]): Int
Finds first index where this
NonEmptyVector
contains a givenEvery
as a slice.Finds first index where this
NonEmptyVector
contains a givenEvery
as a slice.- that
the
Every
defining the slice to look for- returns
the first index such that the elements of this
NonEmptyVector
starting at this index match the elements ofEvery
that
, or-1
of no such subsequence exists.
- final def indexOfSlice[U >: T](that: GenSeq[U], from: Int): Int
Finds first index after or at a start index where this
NonEmptyVector
contains a givenGenSeq
as a slice.Finds first index after or at a start index where this
NonEmptyVector
contains a givenGenSeq
as a slice.- that
the
GenSeq
defining the slice to look for- from
the start index
- returns
the first index
>=
from
at which the elements of thisNonEmptyVector
starting at that index match the elements ofGenSeq
that
, or-1
of no such subsequence exists.
- final def indexOfSlice[U >: T](that: GenSeq[U]): Int
Finds first index where this
NonEmptyVector
contains a givenGenSeq
as a slice.Finds first index where this
NonEmptyVector
contains a givenGenSeq
as a slice.- that
the
GenSeq
defining the slice to look for- returns
the first index at which the elements of this
NonEmptyVector
starting at that index match the elements ofGenSeq
that
, or-1
of no such subsequence exists.
- final def indexWhere(p: (T) => Boolean, from: Int): Int
Finds index of the first element satisfying some predicate after or at some start index.
Finds index of the first element satisfying some predicate after or at some start index.
- p
the predicate used to test elements.
- from
the start index
- returns
the index
>=
from
of the first element of thisNonEmptyVector
that satisfies the predicatep
, or-1
, if none exists.
- final def indexWhere(p: (T) => Boolean): Int
Finds index of the first element satisfying some predicate.
Finds index of the first element satisfying some predicate.
- p
the predicate used to test elements.
- returns
the index of the first element of this
NonEmptyVector
that satisfies the predicatep
, or-1
, if none exists.
- final def indices: Range
Produces the range of all indices of this
NonEmptyVector
.Produces the range of all indices of this
NonEmptyVector
.- returns
a
Range
value from0
to one less than the length of thisNonEmptyVector
.
- final def isDefinedAt(idx: Int): Boolean
Tests whether this
NonEmptyVector
contains given index.Tests whether this
NonEmptyVector
contains given index.- idx
the index to test
- returns
true if this
NonEmptyVector
contains an element at positionidx
,false
otherwise.
- final def isEmpty: Boolean
Returns
false
to indicate thisNonEmptyVector
, like allNonEmptyVector
s, is non-empty.Returns
false
to indicate thisNonEmptyVector
, like allNonEmptyVector
s, is non-empty.- returns
false
- final def isInstanceOf[T0]: Boolean
- Definition Classes
- Any
- final def isTraversableAgain: Boolean
Returns
true
to indicate thisNonEmptyVector
, like allNonEmptyVector
s, can be traversed repeatedly.Returns
true
to indicate thisNonEmptyVector
, like allNonEmptyVector
s, can be traversed repeatedly.- returns
true
- final def iterator: Iterator[T]
Creates and returns a new iterator over all elements contained in this
NonEmptyVector
.Creates and returns a new iterator over all elements contained in this
NonEmptyVector
.- returns
the new iterator
- final def last: T
Selects the last element of this
NonEmptyVector
.Selects the last element of this
NonEmptyVector
.- returns
the last element of this
NonEmptyVector
.
- final def lastIndexOf[U >: T](elem: U, end: Int): Int
Finds the index of the last occurrence of some value in this
NonEmptyVector
before or at a givenend
index.Finds the index of the last occurrence of some value in this
NonEmptyVector
before or at a givenend
index.- elem
the element value to search for.
- end
the end index.
- returns
the index
>=
end
of the last element of thisNonEmptyVector
that is equal (as determined by==
) toelem
, or-1
, if none exists.
- final def lastIndexOf[U >: T](elem: U): Int
Finds the index of the last occurrence of some value in this
NonEmptyVector
.Finds the index of the last occurrence of some value in this
NonEmptyVector
.- elem
the element value to search for.
- returns
the index of the last element of this
NonEmptyVector
that is equal (as determined by==
) toelem
, or-1
, if none exists.
- final def lastIndexOfSlice[U >: T](that: NonEmptyVector[U], end: Int): Int
Finds the last index before or at a given end index where this
NonEmptyVector
contains a givenNonEmptyVector
as a slice.Finds the last index before or at a given end index where this
NonEmptyVector
contains a givenNonEmptyVector
as a slice.- that
the
NonEmptyVector
defining the slice to look for- end
the end index
- returns
the last index
>=
end
at which the elements of thisNonEmptyVector
starting at that index match the elements ofNonEmptyVector
that
, or-1
of no such subsequence exists.
- final def lastIndexOfSlice[U >: T](that: Every[U], end: Int): Int
Finds the last index before or at a given end index where this
NonEmptyVector
contains a givenEvery
as a slice.Finds the last index before or at a given end index where this
NonEmptyVector
contains a givenEvery
as a slice.- that
the
Every
defining the slice to look for- end
the end index
- returns
the last index
>=
end
at which the elements of thisNonEmptyVector
starting at that index match the elements ofEvery
that
, or-1
of no such subsequence exists.
- final def lastIndexOfSlice[U >: T](that: NonEmptyVector[U]): Int
Finds the last index where this
NonEmptyVector
contains a givenNonEmptyVector
as a slice.Finds the last index where this
NonEmptyVector
contains a givenNonEmptyVector
as a slice.- that
the
NonEmptyVector
defining the slice to look for- returns
the last index at which the elements of this
NonEmptyVector
starting at that index match the elements ofNonEmptyVector
that
, or-1
of no such subsequence exists.
- final def lastIndexOfSlice[U >: T](that: Every[U]): Int
Finds the last index where this
NonEmptyVector
contains a givenEvery
as a slice.Finds the last index where this
NonEmptyVector
contains a givenEvery
as a slice.- that
the
Every
defining the slice to look for- returns
the last index at which the elements of this
NonEmptyVector
starting at that index match the elements ofEvery
that
, or-1
of no such subsequence exists.
- final def lastIndexOfSlice[U >: T](that: GenSeq[U], end: Int): Int
Finds the last index before or at a given end index where this
NonEmptyVector
contains a givenGenSeq
as a slice.Finds the last index before or at a given end index where this
NonEmptyVector
contains a givenGenSeq
as a slice.- that
the
GenSeq
defining the slice to look for- end
the end index
- returns
the last index
>=
end
at which the elements of thisNonEmptyVector
starting at that index match the elements ofGenSeq
that
, or-1
of no such subsequence exists.
- final def lastIndexOfSlice[U >: T](that: GenSeq[U]): Int
Finds the last index where this
NonEmptyVector
contains a givenGenSeq
as a slice.Finds the last index where this
NonEmptyVector
contains a givenGenSeq
as a slice.- that
the
GenSeq
defining the slice to look for- returns
the last index at which the elements of this
NonEmptyVector
starting at that index match the elements ofGenSeq
that
, or-1
of no such subsequence exists.
- final def lastIndexWhere(p: (T) => Boolean, end: Int): Int
Finds index of last element satisfying some predicate before or at given end index.
Finds index of last element satisfying some predicate before or at given end index.
- p
the predicate used to test elements.
- end
the end index
- returns
the index
>=
end
of the last element of thisNonEmptyVector
that satisfies the predicatep
, or-1
, if none exists.
- final def lastIndexWhere(p: (T) => Boolean): Int
Finds index of last element satisfying some predicate.
Finds index of last element satisfying some predicate.
- p
the predicate used to test elements.
- returns
the index of the last element of this
NonEmptyVector
that satisfies the predicatep
, or-1
, if none exists.
- final def lastOption: Option[T]
Returns the last element of this
NonEmptyVector
, wrapped in aSome
.Returns the last element of this
NonEmptyVector
, wrapped in aSome
.- returns
the last element, wrapped in a
Some
.
- final def length: Int
The length of this
NonEmptyVector
.The length of this
NonEmptyVector
.Note:
length
andsize
yield the same result, which will be>
= 1.- returns
the number of elements in this
NonEmptyVector
.
- final def lengthCompare(len: Int): Int
Compares the length of this
NonEmptyVector
to a test value.Compares the length of this
NonEmptyVector
to a test value.- len
the test value that gets compared with the length.
- returns
a value
x
wherex < 0 if this.length < len x == 0 if this.length == len x > 0 if this.length > len
- final def map[U](f: (T) => U): NonEmptyVector[U]
Builds a new
NonEmptyVector
by applying a function to all elements of thisNonEmptyVector
.Builds a new
NonEmptyVector
by applying a function to all elements of thisNonEmptyVector
.- U
the element type of the returned
NonEmptyVector
.- f
the function to apply to each element.
- returns
a new
NonEmptyVector
resulting from applying the given functionf
to each element of thisNonEmptyVector
and collecting the results.
- final def max[U >: T](implicit cmp: Ordering[U]): T
Finds the largest element.
Finds the largest element.
- returns
the largest element of this
NonEmptyVector
.
- final def maxBy[U](f: (T) => U)(implicit cmp: Ordering[U]): T
Finds the largest result after applying the given function to every element.
Finds the largest result after applying the given function to every element.
- returns
the largest result of applying the given function to every element of this
NonEmptyVector
.
- final def min[U >: T](implicit cmp: Ordering[U]): T
Finds the smallest element.
Finds the smallest element.
- returns
the smallest element of this
NonEmptyVector
.
- final def minBy[U](f: (T) => U)(implicit cmp: Ordering[U]): T
Finds the smallest result after applying the given function to every element.
Finds the smallest result after applying the given function to every element.
- returns
the smallest result of applying the given function to every element of this
NonEmptyVector
.
- final def mkString(start: String, sep: String, end: String): String
Displays all elements of this
NonEmptyVector
in a string using start, end, and separator strings.Displays all elements of this
NonEmptyVector
in a string using start, end, and separator strings.- start
the starting string.
- sep
the separator string.
- end
the ending string.
- returns
a string representation of this
NonEmptyVector
. The resulting string begins with the stringstart
and ends with the stringend
. Inside, In the resulting string, the result of invokingtoString
on all elements of thisNonEmptyVector
are separated by the stringsep
.
- final def mkString(sep: String): String
Displays all elements of this
NonEmptyVector
in a string using a separator string.Displays all elements of this
NonEmptyVector
in a string using a separator string.- sep
the separator string
- returns
a string representation of this
NonEmptyVector
. In the resulting string, the result of invokingtoString
on all elements of thisNonEmptyVector
are separated by the stringsep
.
- final def mkString: String
Displays all elements of this
NonEmptyVector
in a string.Displays all elements of this
NonEmptyVector
in a string.- returns
a string representation of this
NonEmptyVector
. In the resulting string, the result of invokingtoString
on all elements of thisNonEmptyVector
follow each other without any separator string.
- final def nonEmpty: Boolean
Returns
true
to indicate thisNonEmptyVector
, like allNonEmptyVector
s, is non-empty.Returns
true
to indicate thisNonEmptyVector
, like allNonEmptyVector
s, is non-empty.- returns
true
- final def padTo[U >: T](len: Int, elem: U): NonEmptyVector[U]
A copy of this
NonEmptyVector
with an element value appended until a given target length is reached.A copy of this
NonEmptyVector
with an element value appended until a given target length is reached.- len
the target length
- elem
he padding value
- returns
a new
NonEmptyVector
consisting of all elements of thisNonEmptyVector
followed by the minimal number of occurrences ofelem
so that the resultingNonEmptyVector
has a length of at leastlen
.
- final def patch[U >: T](from: Int, that: NonEmptyVector[U], replaced: Int): NonEmptyVector[U]
Produces a new
NonEmptyVector
where a slice of elements in thisNonEmptyVector
is replaced by anotherNonEmptyVector
Produces a new
NonEmptyVector
where a slice of elements in thisNonEmptyVector
is replaced by anotherNonEmptyVector
- from
the index of the first replaced element
- that
the
NonEmptyVector
whose elements should replace a slice in thisNonEmptyVector
- replaced
the number of elements to drop in the original
NonEmptyVector
- final def permutations: Iterator[NonEmptyVector[T]]
Iterates over distinct permutations.
Iterates over distinct permutations.
Here's an example:
NonEmptyVector('a', 'b', 'b').permutations.toVector = Vector(NonEmptyVector(a, b, b), NonEmptyVector(b, a, b), NonEmptyVector(b, b, a))
- returns
an iterator that traverses the distinct permutations of this
NonEmptyVector
.
- final def prefixLength(p: (T) => Boolean): Int
Returns the length of the longest prefix whose elements all satisfy some predicate.
Returns the length of the longest prefix whose elements all satisfy some predicate.
- p
the predicate used to test elements.
- returns
the length of the longest prefix of this
NonEmptyVector
such that every element of the segment satisfies the predicatep
.
- final def product[U >: T](implicit num: Numeric[U]): U
The result of multiplying all the elements of this
NonEmptyVector
.The result of multiplying all the elements of this
NonEmptyVector
.This method can be invoked for any
NonEmptyVector[T]
for which an implicitNumeric[T]
exists.- returns
the product of all elements
- final def reduce[U >: T](op: (U, U) => U): U
Reduces the elements of this
NonEmptyVector
using the specified associative binary operator.Reduces the elements of this
NonEmptyVector
using the specified associative binary operator.The order in which operations are performed on elements is unspecified and may be nondeterministic.
- U
a type parameter for the binary operator, a supertype of T.
- op
a binary operator that must be associative.
- returns
the result of applying reduce operator
op
between all the elements of thisNonEmptyVector
.
- final def reduceLeft[U >: T](op: (U, T) => U): U
Applies a binary operator to all elements of this
NonEmptyVector
, going left to right.Applies a binary operator to all elements of this
NonEmptyVector
, going left to right.- U
the result type of the binary operator.
- op
the binary operator.
- returns
the result of inserting
op
between consecutive elements of thisNonEmptyVector
, going left to right:op(...op(op(x_1, x_2), x_3), ..., x_n)
where x_{1}, ..., x_{n} are the elements of thisNonEmptyVector
.
- final def reduceLeftOption[U >: T](op: (U, T) => U): Option[U]
Applies a binary operator to all elements of this
NonEmptyVector
, going left to right, returning the result in aSome
.Applies a binary operator to all elements of this
NonEmptyVector
, going left to right, returning the result in aSome
.- U
the result type of the binary operator.
- op
the binary operator.
- returns
a
Some
containing the result ofreduceLeft(op)
- final def reduceOption[U >: T](op: (U, U) => U): Option[U]
- final def reduceRight[U >: T](op: (T, U) => U): U
Applies a binary operator to all elements of this
NonEmptyVector
, going right to left.Applies a binary operator to all elements of this
NonEmptyVector
, going right to left.- U
the result of the binary operator
- op
the binary operator
- returns
the result of inserting
op
between consecutive elements of thisNonEmptyVector
, going right to left:op(x_1, op(x_2, ... op(x_{n-1}, x_n)...))
where x_{1}, ..., x_{n} are the elements of thisNonEmptyVector
.
- final def reduceRightOption[U >: T](op: (T, U) => U): Option[U]
Applies a binary operator to all elements of this
NonEmptyVector
, going right to left, returning the result in aSome
.Applies a binary operator to all elements of this
NonEmptyVector
, going right to left, returning the result in aSome
.- U
the result of the binary operator
- op
the binary operator
- returns
a
Some
containing the result ofreduceRight(op)
- final def reverse: NonEmptyVector[T]
Returns new
NonEmptyVector
with elements in reverse order.Returns new
NonEmptyVector
with elements in reverse order.- returns
a new
NonEmptyVector
with all elements of thisNonEmptyVector
in reversed order.
- final def reverseIterator: Iterator[T]
An iterator yielding elements in reverse order.
An iterator yielding elements in reverse order.
Note:
nonEmptyVector.reverseIterator
is the same asnonEmptyVector.reverse.iterator
, but might be more efficient.- returns
an iterator yielding the elements of this
NonEmptyVector
in reversed order
- final def reverseMap[U](f: (T) => U): NonEmptyVector[U]
Builds a new
NonEmptyVector
by applying a function to all elements of thisNonEmptyVector
and collecting the results in reverse order.Builds a new
NonEmptyVector
by applying a function to all elements of thisNonEmptyVector
and collecting the results in reverse order.Note:
nonEmptyVector.reverseMap(f)
is the same asnonEmptyVector.reverse.map(f)
, but might be more efficient.- U
the element type of the returned
NonEmptyVector
.- f
the function to apply to each element.
- returns
a new
NonEmptyVector
resulting from applying the given functionf
to each element of thisNonEmptyVector
and collecting the results in reverse order.
- final def sameElements[U >: T](that: NonEmptyVector[U]): Boolean
Checks if the given
NonEmptyVector
contains the same elements in the same order as thisNonEmptyVector
.Checks if the given
NonEmptyVector
contains the same elements in the same order as thisNonEmptyVector
.- that
the
NonEmptyVector
with which to compare- returns
true
, if both this and the givenNonEmptyVector
contain the same elements in the same order,false
otherwise.
- final def sameElements[U >: T](that: Every[U]): Boolean
Checks if the given
Every
contains the same elements in the same order as thisNonEmptyVector
.Checks if the given
Every
contains the same elements in the same order as thisNonEmptyVector
.- that
the
Every
with which to compare- returns
true
, if both this and the givenEvery
contain the same elements in the same order,false
otherwise.
- final def sameElements[U >: T](that: GenIterable[U]): Boolean
Checks if the given
GenIterable
contains the same elements in the same order as thisNonEmptyVector
.Checks if the given
GenIterable
contains the same elements in the same order as thisNonEmptyVector
.- that
the
GenIterable
with which to compare- returns
true
, if both thisNonEmptyVector
and the givenGenIterable
contain the same elements in the same order,false
otherwise.
- final def scan[U >: T](z: U)(op: (U, U) => U): NonEmptyVector[U]
Computes a prefix scan of the elements of this
NonEmptyVector
.Computes a prefix scan of the elements of this
NonEmptyVector
.Note: The neutral element z may be applied more than once.
Here are some examples:
NonEmptyVector(1, 2, 3).scan(0)(_ + _) == NonEmptyVector(0, 1, 3, 6) NonEmptyVector(1, 2, 3).scan("z")(_ + _.toString) == NonEmptyVector("z", "z1", "z12", "z123")
- U
a type parameter for the binary operator, a supertype of T, and the type of the resulting
NonEmptyVector
.- z
a neutral element for the scan operation; may be added to the result an arbitrary number of times, and must not change the result (e.g.,
Nil
for list concatenation, 0 for addition, or 1 for multiplication.)- op
a binary operator that must be associative
- returns
a new
NonEmptyVector
containing the prefix scan of the elements in thisNonEmptyVector
- final def scanLeft[B](z: B)(op: (B, T) => B): NonEmptyVector[B]
Produces a
NonEmptyVector
containing cumulative results of applying the operator going left to right.Produces a
NonEmptyVector
containing cumulative results of applying the operator going left to right.Here are some examples:
NonEmptyVector(1, 2, 3).scanLeft(0)(_ + _) == NonEmptyVector(0, 1, 3, 6) NonEmptyVector(1, 2, 3).scanLeft("z")(_ + _) == NonEmptyVector("z", "z1", "z12", "z123")
- B
the result type of the binary operator and type of the resulting
NonEmptyVector
- z
the start value.
- op
the binary operator.
- returns
a new
NonEmptyVector
containing the intermediate results of insertingop
between consecutive elements of thisNonEmptyVector
, going left to right, with the start value,z
, on the left.
- final def scanRight[B](z: B)(op: (T, B) => B): NonEmptyVector[B]
Produces a
NonEmptyVector
containing cumulative results of applying the operator going right to left.Produces a
NonEmptyVector
containing cumulative results of applying the operator going right to left.Here are some examples:
NonEmptyVector(1, 2, 3).scanRight(0)(_ + _) == NonEmptyVector(6, 5, 3, 0) NonEmptyVector(1, 2, 3).scanRight("z")(_ + _) == NonEmptyVector("123z", "23z", "3z", "z")
- B
the result of the binary operator and type of the resulting
NonEmptyVector
- z
the start value
- op
the binary operator
- returns
a new
NonEmptyVector
containing the intermediate results of insertingop
between consecutive elements of thisNonEmptyVector
, going right to left, with the start value,z
, on the right.
- final def segmentLength(p: (T) => Boolean, from: Int): Int
Computes length of longest segment whose elements all satisfy some predicate.
Computes length of longest segment whose elements all satisfy some predicate.
- p
the predicate used to test elements.
- from
the index where the search starts.
- final def size: Int
The size of this
NonEmptyVector
.The size of this
NonEmptyVector
.Note:
length
andsize
yield the same result, which will be>
= 1.- returns
the number of elements in this
NonEmptyVector
.
- final def sliding(size: Int, step: Int): Iterator[NonEmptyVector[T]]
Groups elements in fixed size blocks by passing a “sliding window” over them (as opposed to partitioning them, as is done in grouped.), moving the sliding window by a given
step
each time.Groups elements in fixed size blocks by passing a “sliding window” over them (as opposed to partitioning them, as is done in grouped.), moving the sliding window by a given
step
each time.- size
the number of elements per group
- step
the distance between the first elements of successive groups
- returns
an iterator producing
NonEmptyVector
s of sizesize
, except the last and the only element will be truncated if there are fewer elements thansize
.
- final def sliding(size: Int): Iterator[NonEmptyVector[T]]
Groups elements in fixed size blocks by passing a “sliding window” over them (as opposed to partitioning them, as is done in grouped.)
Groups elements in fixed size blocks by passing a “sliding window” over them (as opposed to partitioning them, as is done in grouped.)
- size
the number of elements per group
- returns
an iterator producing
NonEmptyVector
s of sizesize
, except the last and the only element will be truncated if there are fewer elements thansize
.
- final def sortBy[U](f: (T) => U)(implicit ord: Ordering[U]): NonEmptyVector[T]
Sorts this
NonEmptyVector
according to theOrdering
of the result of applying the given function to every element.Sorts this
NonEmptyVector
according to theOrdering
of the result of applying the given function to every element.- U
the target type of the transformation
f
, and the type where theOrdering
ord
is defined.- f
the transformation function mapping elements to some other domain
U
.- ord
the ordering assumed on domain
U
.- returns
a
NonEmptyVector
consisting of the elements of thisNonEmptyVector
sorted according to theOrdering
wherex < y if ord.lt(f(x), f(y))
.
- final def sortWith(lt: (T, T) => Boolean): NonEmptyVector[T]
Sorts this
NonEmptyVector
according to a comparison function.Sorts this
NonEmptyVector
according to a comparison function.The sort is stable. That is, elements that are equal (as determined by
lt
) appear in the same order in the sortedNonEmptyVector
as in the original.- returns
a
NonEmptyVector
consisting of the elements of thisNonEmptyVector
sorted according to the comparison functionlt
.
- final def sorted[U >: T](implicit ord: Ordering[U]): NonEmptyVector[U]
Sorts this
NonEmptyVector
according to anOrdering
.Sorts this
NonEmptyVector
according to anOrdering
.The sort is stable. That is, elements that are equal (as determined by
lt
) appear in the same order in the sortedNonEmptyVector
as in the original.- ord
the
Ordering
to be used to compare elements.- returns
a
NonEmptyVector
consisting of the elements of thisNonEmptyVector
sorted according to the comparison functionlt
.
- final def startsWith[B](that: NonEmptyVector[B], offset: Int): Boolean
Indicates whether this
NonEmptyVector
starts with the givenNonEmptyVector
at the given index.Indicates whether this
NonEmptyVector
starts with the givenNonEmptyVector
at the given index.- that
the
NonEmptyVector
slice to look for in thisNonEmptyVector
- offset
the index at which this
NonEmptyVector
is searched.- returns
true
if thisNonEmptyVector
hasthat
as a slice at the indexoffset
,false
otherwise.
- final def startsWith[B](that: Every[B], offset: Int): Boolean
Indicates whether this
NonEmptyVector
starts with the givenEvery
at the given index.Indicates whether this
NonEmptyVector
starts with the givenEvery
at the given index.- that
the
Every
slice to look for in thisNonEmptyVector
- offset
the index at which this
NonEmptyVector
is searched.- returns
true
if thisNonEmptyVector
hasthat
as a slice at the indexoffset
,false
otherwise.
- final def startsWith[B](that: NonEmptyVector[B]): Boolean
Indicates whether this
NonEmptyVector
starts with the givenNonEmptyVector
.Indicates whether this
NonEmptyVector
starts with the givenNonEmptyVector
.- that
the
NonEmptyVector
to test- returns
true
if this collection hasthat
as a prefix,false
otherwise.
- final def startsWith[B](that: Every[B]): Boolean
Indicates whether this
NonEmptyVector
starts with the givenEvery
.Indicates whether this
NonEmptyVector
starts with the givenEvery
.- that
the
Every
to test- returns
true
if this collection hasthat
as a prefix,false
otherwise.
- final def startsWith[B](that: GenSeq[B], offset: Int): Boolean
Indicates whether this
NonEmptyVector
starts with the givenGenSeq
at the given index.Indicates whether this
NonEmptyVector
starts with the givenGenSeq
at the given index.- that
the
GenSeq
slice to look for in thisNonEmptyVector
- offset
the index at which this
NonEmptyVector
is searched.- returns
true
if thisNonEmptyVector
hasthat
as a slice at the indexoffset
,false
otherwise.
- final def startsWith[B](that: GenSeq[B]): Boolean
Indicates whether this
NonEmptyVector
starts with the givenGenSeq
.Indicates whether this
NonEmptyVector
starts with the givenGenSeq
.- that
the
GenSeq
slice to look for in thisNonEmptyVector
- returns
true
if thisNonEmptyVector
hasthat
as a prefix,false
otherwise.
- def stringPrefix: String
Returns
"NonEmptyVector"
, the prefix of this object'stoString
representation.Returns
"NonEmptyVector"
, the prefix of this object'stoString
representation.- returns
the string
"NonEmptyVector"
- final def sum[U >: T](implicit num: Numeric[U]): U
The result of summing all the elements of this
NonEmptyVector
.The result of summing all the elements of this
NonEmptyVector
.This method can be invoked for any
NonEmptyVector[T]
for which an implicitNumeric[T]
exists.- returns
the sum of all elements
- final def to[Col[_]](factory: Factory[T, Col[T]]): Col[T]
Converts this
NonEmptyVector
into a collection of typeCol
by copying all elements.Converts this
NonEmptyVector
into a collection of typeCol
by copying all elements.- Col
the collection type to build.
- returns
a new collection containing all elements of this
NonEmptyVector
.
- final def toArray[U >: T](implicit classTag: ClassTag[U]): Array[U]
Converts this
NonEmptyVector
to an array.Converts this
NonEmptyVector
to an array.- returns
an array containing all elements of this
NonEmptyVector
. AClassTag
must be available for the element type of thisNonEmptyVector
.
- final def toBuffer[U >: T]: Buffer[U]
Converts this
NonEmptyVector
to a mutable buffer.Converts this
NonEmptyVector
to a mutable buffer.- returns
a buffer containing all elements of this
NonEmptyVector
.
- final def toIndexedSeq: IndexedSeq[T]
Converts this
NonEmptyVector
to an immutableIndexedSeq
.Converts this
NonEmptyVector
to an immutableIndexedSeq
.- returns
an immutable
IndexedSeq
containing all elements of thisNonEmptyVector
.
- final def toIterable: Iterable[T]
Converts this
NonEmptyVector
to an iterable collection.Converts this
NonEmptyVector
to an iterable collection.- returns
an
Iterable
containing all elements of thisNonEmptyVector
.
- final def toIterator: Iterator[T]
Returns an
Iterator
over the elements in thisNonEmptyVector
.Returns an
Iterator
over the elements in thisNonEmptyVector
.- returns
an
Iterator
containing all elements of thisNonEmptyVector
.
- final def toList: List[T]
Converts this
NonEmptyVector
to aVector
.Converts this
NonEmptyVector
to aVector
.- returns
a
Vector
containing all elements of thisNonEmptyVector
.
- final def toMap[K, V](implicit ev: <:<[T, (K, V)]): Map[K, V]
Converts this
NonEmptyVector
to a map.Converts this
NonEmptyVector
to a map.This method is unavailable unless the elements are members of
Tuple2
, each((K, V))
becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys.- returns
a map of type
immutable.Map[K, V]
containing all key/value pairs of type(K, V)
of thisNonEmptyVector
.
- final def toSeq: Seq[T]
Converts this
NonEmptyVector
to an immutableIndexedSeq
.Converts this
NonEmptyVector
to an immutableIndexedSeq
.- returns
an immutable
IndexedSeq
containing all elements of thisNonEmptyVector
.
- final def toSet[U >: T]: Set[U]
Converts this
NonEmptyVector
to a set.Converts this
NonEmptyVector
to a set.- returns
a set containing all elements of this
NonEmptyVector
.
- final def toStream: Stream[T]
Converts this
NonEmptyVector
to a stream.Converts this
NonEmptyVector
to a stream.- returns
a stream containing all elements of this
NonEmptyVector
.
- def toString(): String
Returns a string representation of this
NonEmptyVector
.Returns a string representation of this
NonEmptyVector
.- returns
the string
"NonEmptyVector"
followed by the result of invokingtoString
on thisNonEmptyVector
's elements, surrounded by parentheses.
- Definition Classes
- NonEmptyVector → Any
- val toVector: Vector[T]
- final def transpose[U](implicit ev: <:<[T, NonEmptyVector[U]]): NonEmptyVector[NonEmptyVector[U]]
- final def union[U >: T](that: GenSeq[U])(implicit cbf: CanBuildFrom[Vector[T], U, Vector[U]]): NonEmptyVector[U]
Produces a new
NonEmptyVector
that contains all elements of thisNonEmptyVector
and also all elements of a givenGenSeq
.Produces a new
NonEmptyVector
that contains all elements of thisNonEmptyVector
and also all elements of a givenGenSeq
.nonEmptyVectorX
union
ys
is equivalent tononEmptyVectorX
++
ys
.Another way to express this is that
nonEmptyVectorX
union
ys
computes the order-presevring multi-set union ofnonEmptyVectorX
andys
. Thisunion
method is hence a counter-part ofdiff
andintersect
that also work on multi-sets.- that
the
GenSeq
to add.- returns
a new
NonEmptyVector
that contains all elements of thisNonEmptyVector
followed by all elements ofthat
GenSeq
.
- final def union[U >: T](that: NonEmptyVector[U]): NonEmptyVector[U]
Produces a new
NonEmptyVector
that contains all elements of thisNonEmptyVector
and also all elements of a givenNonEmptyVector
.Produces a new
NonEmptyVector
that contains all elements of thisNonEmptyVector
and also all elements of a givenNonEmptyVector
.nonEmptyVectorX
union
nonEmptyVectorY
is equivalent tononEmptyVectorX
++
nonEmptyVectorY
.Another way to express this is that
nonEmptyVectorX
union
nonEmptyVectorY
computes the order-presevring multi-set union ofnonEmptyVectorX
andnonEmptyVectorY
. Thisunion
method is hence a counter-part ofdiff
andintersect
that also work on multi-sets.- that
the
NonEmptyVector
to add.- returns
a new
NonEmptyVector
that contains all elements of thisNonEmptyVector
followed by all elements ofthat
.
- final def union[U >: T](that: Every[U]): NonEmptyVector[U]
Produces a new
NonEmptyVector
that contains all elements of thisNonEmptyVector
and also all elements of a givenEvery
.Produces a new
NonEmptyVector
that contains all elements of thisNonEmptyVector
and also all elements of a givenEvery
.nonEmptyVectorX
union
everyY
is equivalent tononEmptyVectorX
++
everyY
.Another way to express this is that
nonEmptyVectorX
union
everyY
computes the order-presevring multi-set union ofnonEmptyVectorX
andeveryY
. Thisunion
method is hence a counter-part ofdiff
andintersect
that also work on multi-sets.- that
the
Every
to add.- returns
a new
NonEmptyVector
that contains all elements of thisNonEmptyVector
followed by all elements ofthat
Every
.
- final def unzip[L, R](implicit asPair: (T) => (L, R)): (NonEmptyVector[L], NonEmptyVector[R])
Converts this
NonEmptyVector
of pairs into twoNonEmptyVector
s of the first and second half of each pair.Converts this
NonEmptyVector
of pairs into twoNonEmptyVector
s of the first and second half of each pair.- L
the type of the first half of the element pairs
- R
the type of the second half of the element pairs
- asPair
an implicit conversion that asserts that the element type of this
NonEmptyVector
is a pair.- returns
a pair of
NonEmptyVector
s, containing the first and second half, respectively, of each element pair of thisNonEmptyVector
.
- final def unzip3[L, M, R](implicit asTriple: (T) => (L, M, R)): (NonEmptyVector[L], NonEmptyVector[M], NonEmptyVector[R])
Converts this
NonEmptyVector
of triples into threeNonEmptyVector
s of the first, second, and and third element of each triple.Converts this
NonEmptyVector
of triples into threeNonEmptyVector
s of the first, second, and and third element of each triple.- L
the type of the first member of the element triples
- R
the type of the third member of the element triples
- asTriple
an implicit conversion that asserts that the element type of this
NonEmptyVector
is a triple.- returns
a triple of
NonEmptyVector
s, containing the first, second, and third member, respectively, of each element triple of thisNonEmptyVector
.
- final def updated[U >: T](idx: Int, elem: U): NonEmptyVector[U]
A copy of this
NonEmptyVector
with one single replaced element.A copy of this
NonEmptyVector
with one single replaced element.- idx
the position of the replacement
- elem
the replacing element
- returns
a copy of this
NonEmptyVector
with the element at positionidx
replaced byelem
.
- Exceptions thrown
IndexOutOfBoundsException
if the passed index is greater than or equal to the length of thisNonEmptyVector
- final def zipAll[O, U >: T](other: Iterable[O], thisElem: U, otherElem: O): NonEmptyVector[(U, O)]
Returns a
NonEmptyVector
formed from thisNonEmptyVector
and an iterable collection by combining corresponding elements in pairs.Returns a
NonEmptyVector
formed from thisNonEmptyVector
and an iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements will be used to extend the shorter collection to the length of the longer.- other
the
Iterable
providing the second half of each result pair- thisElem
the element to be used to fill up the result if this
NonEmptyVector
is shorter thanthat
Iterable
.- returns
a new
NonEmptyVector
containing pairs consisting of corresponding elements of thisNonEmptyVector
andthat
. The length of the returned collection is the maximum of the lengths of thisNonEmptyVector
andthat
. If thisNonEmptyVector
is shorter thanthat
,thisElem
values are used to pad the result. Ifthat
is shorter than thisNonEmptyVector
,thatElem
values are used to pad the result.
- final def zipWithIndex: NonEmptyVector[(T, Int)]
Zips this
NonEmptyVector
with its indices.Zips this
NonEmptyVector
with its indices.- returns
A new
NonEmptyVector
containing pairs consisting of all elements of thisNonEmptyVector
paired with their index. Indices start at 0.