final class NonEmptyArray[T] extends AnyVal
A non-empty array: an ordered, mutable, non-empty collection of elements with IndexedSeq
performance characteristics.
The purpose of NonEmptyArray
is to allow you to express in a type that an Array
is non-empty, thereby eliminating the
need for (and potential exception from) a run-time check for non-emptiness. For a non-empty immutable sequence with IndexedSeq
performance, see Every
.
Constructing NonEmptyArray
s
You can construct a NonEmptyArray
by passing one or more elements to the NonEmptyArray.apply
factory method:
scala> NonEmptyArray(1, 2, 3) res0: org.scalactic.anyvals.NonEmptyArray[Int] = NonEmptyArray(1, 2, 3)
Working with NonEmptyArray
s
NonEmptyArray
does not extend Scala's Seq
or Traversable
traits because these require that
implementations may be empty. For example, if you invoke tail
on a Seq
that contains just one element,
you'll get an empty Seq
:
scala> Array(1).tail res6: Array[Int] = Array()
On the other hand, many useful methods exist on Seq
that when invoked on a non-empty Seq
are guaranteed
to not result in an empty Seq
. For convenience, NonEmptyArray
defines a method corresponding to every such Seq
method. Here are some examples:
NonEmptyArray(1, 2, 3).map(_ + 1) // Result: NonEmptyArray(2, 3, 4) NonEmptyArray(1).map(_ + 1) // Result: NonEmptyArray(2) NonEmptyArray(1, 2, 3).containsSlice(NonEmptyArray(2, 3)) // Result: true NonEmptyArray(1, 2, 3).containsSlice(NonEmptyArray(3, 4)) // Result: false NonEmptyArray(-1, -2, 3, 4, 5).minBy(_.abs) // Result: -1
NonEmptyArray
does not currently define any methods corresponding to Seq
methods that could result in
an empty Seq
. However, an implicit converison from NonEmptyArray
to Array
is defined in the NonEmptyArray
companion object that will be applied if you attempt to call one of the missing methods. As a
result, you can invoke filter
on an NonEmptyArray
, even though filter
could result
in an empty sequence—but the result type will be Array
instead of NonEmptyArray
:
NonEmptyArray(1, 2, 3).filter(_ < 10) // Result: Array(1, 2, 3) NonEmptyArray(1, 2, 3).filter(_ > 10) // Result: Array()
You can use NonEmptyArray
s in for
expressions. The result will be an NonEmptyArray
unless
you use a filter (an if
clause). Because filters are desugared to invocations of filter
, the
result type will switch to a Array
at that point. Here are some examples:
scala> import org.scalactic.anyvals._ import org.scalactic.anyvals._ scala> for (i <- NonEmptyArray(1, 2, 3)) yield i + 1 res0: org.scalactic.anyvals.NonEmptyArray[Int] = NonEmptyArray(2, 3, 4) scala> for (i <- NonEmptyArray(1, 2, 3) if i < 10) yield i + 1 res1: Array[Int] = Array(2, 3, 4) scala> for { | i <- NonEmptyArray(1, 2, 3) | j <- NonEmptyArray('a', 'b', 'c') | } yield (i, j) res3: org.scalactic.anyvals.NonEmptyArray[(Int, Char)] = NonEmptyArray((1,a), (1,b), (1,c), (2,a), (2,b), (2,c), (3,a), (3,b), (3,c)) scala> for { | i <- NonEmptyArray(1, 2, 3) if i < 10 | j <- NonEmptyArray('a', 'b', 'c') | } yield (i, j) res6: Array[(Int, Char)] = Array((1,a), (1,b), (1,c), (2,a), (2,b), (2,c), (3,a), (3,b), (3,c))
- T
the type of elements contained in this
NonEmptyArray
- Source
- NonEmptyArray.scala
- Alphabetic
- By Inheritance
- NonEmptyArray
- AnyVal
- Any
- Hide All
- Show All
- Public
- Protected
Value Members
- final def !=(arg0: Any): Boolean
- Definition Classes
- Any
- final def ##: Int
- Definition Classes
- Any
- def ++[U >: T](other: IterableOnce[U])(implicit classTag: ClassTag[U]): NonEmptyArray[U]
Returns a new
NonEmptyArray
containing the elements of thisNonEmptyArray
followed by the elements of the passedGenTraversableOnce
.Returns a new
NonEmptyArray
containing the elements of thisNonEmptyArray
followed by the elements of the passedGenTraversableOnce
. The element type of the resultingNonEmptyArray
is the most specific superclass encompassing the element types of thisNonEmptyArray
and the passedGenTraversableOnce
.- U
the element type of the returned
NonEmptyArray
- other
the
GenTraversableOnce
to append- returns
a new
NonEmptyArray
that contains all the elements of thisNonEmptyArray
followed by all elements ofother
.
- def ++[U >: T](other: Every[U])(implicit classTag: ClassTag[U]): NonEmptyArray[U]
Returns a new
NonEmptyArray
containing the elements of thisNonEmptyArray
followed by the elements of the passedEvery
.Returns a new
NonEmptyArray
containing the elements of thisNonEmptyArray
followed by the elements of the passedEvery
. The element type of the resultingNonEmptyArray
is the most specific superclass encompassing the element types of thisNonEmptyArray
and the passedEvery
.- U
the element type of the returned
NonEmptyArray
- other
the
Every
to append- returns
a new
NonEmptyArray
that contains all the elements of thisNonEmptyArray
followed by all elements ofother
.
- def ++[U >: T](other: NonEmptyArray[U])(implicit classTag: ClassTag[U]): NonEmptyArray[U]
Returns a new
NonEmptyArray
containing the elements of thisNonEmptyArray
followed by the elements of the passedNonEmptyArray
.Returns a new
NonEmptyArray
containing the elements of thisNonEmptyArray
followed by the elements of the passedNonEmptyArray
. The element type of the resultingNonEmptyArray
is the most specific superclass encompassing the element types of this and the passedNonEmptyArray
.- U
the element type of the returned
NonEmptyArray
- other
the
NonEmptyArray
to append- returns
a new
NonEmptyList
that contains all the elements of thisNonEmptyList
followed by all elements ofother
.
- final def +:[U >: T](element: U)(implicit classTag: ClassTag[U]): NonEmptyArray[U]
Returns a new
NonEmptyArray
with the given element prepended.Returns a new
NonEmptyArray
with the given element prepended.Note that :-ending operators are right associative. A mnemonic for
+:
vs.:+
is: the COLon goes on the COLlection side.- element
the element to prepend to this
NonEmptyArray
- returns
a new
NonEmptyArray
consisting ofelement
followed by all elements of thisNonEmptyArray
.
- def :+[U >: T](element: U)(implicit classTag: ClassTag[U]): NonEmptyArray[U]
Returns a new
NonEmptyArray
with the given element appended.Returns a new
NonEmptyArray
with the given element appended.Note a mnemonic for
+:
vs.:+
is: the COLon goes on the COLlection side.- element
the element to append to this
NonEmptyArray
- returns
a new
NonEmptyArray
consisting of all elements of thisNonEmptyArray
followed byelement
.
- final def ==(arg0: Any): Boolean
- Definition Classes
- Any
- final def addString(sb: StringBuilder, start: String, sep: String, end: String): StringBuilder
Appends all elements of this
NonEmptyArray
to a string builder using start, end, and separator strings.Appends all elements of this
NonEmptyArray
to a string builder using start, end, and separator strings. The written text will consist of a concatenation of the stringstart
; the result of invokingtoString
on all elements of thisNonEmptyArray
, separated by the stringsep
; and the stringend
- sb
the string builder to which elements will be appended
- start
the ending string
- sep
the separator string
- returns
the string builder,
sb
, to which elements were appended.
- final def addString(sb: StringBuilder, sep: String): StringBuilder
Appends all elements of this
NonEmptyArray
to a string builder using a separator string.Appends all elements of this
NonEmptyArray
to a string builder using a separator string. The written text will consist of a concatenation of the result of invokingtoString
on of every element of thisNonEmptyArray
, separated by the stringsep
.- sb
the string builder to which elements will be appended
- sep
the separator string
- returns
the string builder,
sb
, to which elements were appended.
- final def addString(sb: StringBuilder): StringBuilder
Appends all elements of this
NonEmptyArray
to a string builder.Appends all elements of this
NonEmptyArray
to a string builder. The written text will consist of a concatenation of the result of invokingtoString
on of every element of thisNonEmptyArray
, without any separator string.- sb
the string builder to which elements will be appended
- returns
the string builder,
sb
, to which elements were appended.
- final def apply(idx: Int): T
Selects an element by its index in the
NonEmptyArray
.Selects an element by its index in the
NonEmptyArray
.- returns
the element of this
NonEmptyArray
at indexidx
, where 0 indicates the first element.
- final def asInstanceOf[T0]: T0
- Definition Classes
- Any
- final def collectFirst[U](pf: PartialFunction[T, U])(implicit classTagOfU: ClassTag[U]): Option[U]
Finds the first element of this
NonEmptyArray
for which the given partial function is defined, if any, and applies the partial function to it.Finds the first element of this
NonEmptyArray
for which the given partial function is defined, if any, and applies the partial function to it.- pf
the partial function
- returns
an
Option
containingpf
applied to the first element for which it is defined, orNone
if the partial function was not defined for any element.
- final def contains(elem: T): Boolean
Indicates whether this
NonEmptyArray
contains a given value as an element.Indicates whether this
NonEmptyArray
contains a given value as an element.- elem
the element to look for
- returns
true if this
NonEmptyArray
has an element that is equal (as determined by==)
toelem
, false otherwise.
- final def containsSlice[B](that: NonEmptyArray[B]): Boolean
Indicates whether this
NonEmptyArray
contains a givenNonEmptyArray
as a slice.Indicates whether this
NonEmptyArray
contains a givenNonEmptyArray
as a slice.- that
the
NonEmptyArray
slice to look for- returns
true if this
NonEmptyArray
contains a slice with the same elements asthat
, otherwisefalse
.
- final def containsSlice[B](that: Every[B]): Boolean
Indicates whether this
NonEmptyArray
contains a givenEvery
as a slice.Indicates whether this
NonEmptyArray
contains a givenEvery
as a slice.- that
the
Every
slice to look for- returns
true if this
NonEmptyArray
contains a slice with the same elements asthat
, otherwisefalse
.
- final def containsSlice[B](that: GenSeq[B]): Boolean
Indicates whether this
NonEmptyArray
contains a givenGenSeq
as a slice.Indicates whether this
NonEmptyArray
contains a givenGenSeq
as a slice.- that
the
GenSeq
slice to look for- returns
true if this
NonEmptyArray
contains a slice with the same elements asthat
, otherwisefalse
.
- final def copyToArray[U >: T](arr: Array[U], start: Int, len: Int): Unit
Copies values of this
NonEmptyArray
to an array.Copies values of this
NonEmptyArray
to an array. Fills the given arrayarr
with at mostlen
elements of thisNonEmptyArray
, beginning at indexstart
. Copying will stop once either the end of the currentNonEmptyArray
is reached, the end of the array is reached, orlen
elements have been copied.- arr
the array to fill
- start
the starting index
- len
the maximum number of elements to copy
- final def copyToArray[U >: T](arr: Array[U], start: Int): Unit
Copies values of this
NonEmptyArray
to an array.Copies values of this
NonEmptyArray
to an array. Fills the given arrayarr
with values of thisNonEmptyArray
, beginning at indexstart
. Copying will stop once either the end of the currentNonEmptyArray
is reached, or the end of the array is reached.- arr
the array to fill
- start
the starting index
- final def copyToArray[U >: T](arr: Array[U]): Unit
Copies values of this
NonEmptyArray
to an array.Copies values of this
NonEmptyArray
to an array. Fills the given arrayarr
with values of thisNonEmptyArray
. Copying will stop once either the end of the currentNonEmptyArray
is reached, or the end of the array is reached.- arr
the array to fill
- final def copyToBuffer[U >: T](buf: Buffer[U]): Unit
Copies all elements of this
NonEmptyArray
to a buffer.Copies all elements of this
NonEmptyArray
to a buffer.- buf
the buffer to which elements are copied
- final def corresponds[B](that: NonEmptyArray[B])(p: (T, B) => Boolean): Boolean
Indicates whether every element of this
NonEmptyArray
relates to the corresponding element of a givenNonEmptyArray
by satisfying a given predicate.Indicates whether every element of this
NonEmptyArray
relates to the corresponding element of a givenNonEmptyArray
by satisfying a given predicate.- B
the type of the elements of
that
- that
the
NonEmptyArray
to compare for correspondence- p
the predicate, which relates elements from this and the passed
NonEmptyArray
- returns
true if this and the passed
NonEmptyArray
have the same length andp(x, y)
istrue
for all corresponding elementsx
of thisNonEmptyArray
andy
of that, otherwisefalse
.
- final def corresponds[B](that: Every[B])(p: (T, B) => Boolean): Boolean
Indicates whether every element of this
NonEmptyArray
relates to the corresponding element of a givenEvery
by satisfying a given predicate.Indicates whether every element of this
NonEmptyArray
relates to the corresponding element of a givenEvery
by satisfying a given predicate.- B
the type of the elements of
that
- that
the
Every
to compare for correspondence- p
the predicate, which relates elements from this
NonEmptyArray
and the passedEvery
- returns
true if this
NonEmptyArray
and the passedEvery
have the same length andp(x, y)
istrue
for all corresponding elementsx
of thisNonEmptyArray
andy
of that, otherwisefalse
.
- final def corresponds[B](that: GenSeq[B])(p: (T, B) => Boolean): Boolean
Indicates whether every element of this
NonEmptyArray
relates to the corresponding element of a givenGenSeq
by satisfying a given predicate.Indicates whether every element of this
NonEmptyArray
relates to the corresponding element of a givenGenSeq
by satisfying a given predicate.- B
the type of the elements of
that
- that
the
GenSeq
to compare for correspondence- p
the predicate, which relates elements from this
NonEmptyArray
and the passedGenSeq
- returns
true if this
NonEmptyArray
and the passedGenSeq
have the same length andp(x, y)
istrue
for all corresponding elementsx
of thisNonEmptyArray
andy
of that, otherwisefalse
.
- final def count(p: (T) => Boolean): Int
Counts the number of elements in this
NonEmptyArray
that satisfy a predicate.Counts the number of elements in this
NonEmptyArray
that satisfy a predicate.- p
the predicate used to test elements.
- returns
the number of elements satisfying the predicate
p
.
- final def distinct: NonEmptyArray[T]
Builds a new
NonEmptyArray
from thisNonEmptyArray
without any duplicate elements.Builds a new
NonEmptyArray
from thisNonEmptyArray
without any duplicate elements.- returns
A new
NonEmptyArray
that contains the first occurrence of every element of thisNonEmptyArray
.
- final def endsWith[B](that: NonEmptyArray[B]): Boolean
Indicates whether this
NonEmptyArray
ends with the givenNonEmptyArray
.Indicates whether this
NonEmptyArray
ends with the givenNonEmptyArray
.- that
the
NonEmptyArray
to test- returns
true
if thisNonEmptyArray
hasthat
as a suffix,false
otherwise.
- final def endsWith[B](that: Every[B]): Boolean
Indicates whether this
NonEmptyArray
ends with the givenEvery
.Indicates whether this
NonEmptyArray
ends with the givenEvery
.- that
the
Every
to test- returns
true
if thisNonEmptyArray
hasthat
as a suffix,false
otherwise.
- final def endsWith[B](that: GenSeq[B]): Boolean
Indicates whether this
NonEmptyArray
ends with the givenGenSeq
.Indicates whether this
NonEmptyArray
ends with the givenGenSeq
.- that
the sequence to test
- returns
true
if thisNonEmptyArray
hasthat
as a suffix,false
otherwise.
- final def exists(p: (T) => Boolean): Boolean
Indicates whether a predicate holds for at least one of the elements of this
NonEmptyArray
.Indicates whether a predicate holds for at least one of the elements of this
NonEmptyArray
.- returns
true
if the given predicatep
holds for some of the elements of thisNonEmptyArray
, otherwisefalse
.
- final def find(p: (T) => Boolean): Option[T]
Finds the first element of this
NonEmptyArray
that satisfies the given predicate, if any.Finds the first element of this
NonEmptyArray
that satisfies the given predicate, if any.- p
the predicate used to test elements
- returns
an
Some
containing the first element in thisNonEmptyArray
that satisfiesp
, orNone
if none exists.
- final def flatMap[U](f: (T) => NonEmptyArray[U])(implicit classTag: ClassTag[U]): NonEmptyArray[U]
Builds a new
NonEmptyArray
by applying a function to all elements of thisNonEmptyArray
and using the elements of the resultingNonEmptyArray
s.Builds a new
NonEmptyArray
by applying a function to all elements of thisNonEmptyArray
and using the elements of the resultingNonEmptyArray
s.- U
the element type of the returned
NonEmptyArray
- f
the function to apply to each element.
- returns
a new
NonEmptyArray
containing elements obtained by applying the given functionf
to each element of thisNonEmptyArray
and concatenating the elements of resultingNonEmptyArray
s.
- final def flatten[B](implicit ev: <:<[T, NonEmptyArray[B]], classTag: ClassTag[B]): NonEmptyArray[B]
Converts this
NonEmptyArray
ofNonEmptyArray
s into aNonEmptyArray
formed by the elements of the nestedNonEmptyArray
s.Converts this
NonEmptyArray
ofNonEmptyArray
s into aNonEmptyArray
formed by the elements of the nestedNonEmptyArray
s.Note: You cannot use this
flatten
method on aNonEmptyArray
that contains aGenTraversableOnce
s, because if all the nestedGenTraversableOnce
s were empty, you'd end up with an emptyNonEmptyArray
.- returns
a new
NonEmptyArray
resulting from concatenating all nestedNonEmptyArray
s.
- final def fold[U >: T](z: U)(op: (U, U) => U): U
Folds the elements of this
NonEmptyArray
using the specified associative binary operator.Folds the elements of this
NonEmptyArray
using the specified associative binary operator.The order in which operations are performed on elements is unspecified and may be nondeterministic.
- U
a type parameter for the binary operator, a supertype of T.
- z
a neutral element for the fold operation; may be added to the result an arbitrary number of times, and must not change the result (e.g.,
Nil
for list concatenation, 0 for addition, or 1 for multiplication.)- op
a binary operator that must be associative
- returns
the result of applying fold operator
op
between all the elements andz
- final def foldLeft[B](z: B)(op: (B, T) => B): B
Applies a binary operator to a start value and all elements of this
NonEmptyArray
, going left to right.Applies a binary operator to a start value and all elements of this
NonEmptyArray
, going left to right.- B
the result type of the binary operator.
- z
the start value.
- op
the binary operator.
- returns
the result of inserting
op
between consecutive elements of thisNonEmptyArray
, going left to right, with the start value,z
, on the left:op(...op(op(z, x_1), x_2), ..., x_n)
where x_{1}, ..., x_{n} are the elements of thisNonEmptyArray
.
- final def foldRight[B](z: B)(op: (T, B) => B): B
Applies a binary operator to all elements of this
NonEmptyArray
and a start value, going right to left.Applies a binary operator to all elements of this
NonEmptyArray
and a start value, going right to left.- B
the result of the binary operator
- z
the start value
- op
the binary operator
- returns
the result of inserting
op
between consecutive elements of thisNonEmptyArray
, going right to left, with the start value,z
, on the right:op(x_1, op(x_2, ... op(x_n, z)...))
where x_{1}, ..., x_{n} are the elements of thisNonEmptyArray
.
- final def forall(p: (T) => Boolean): Boolean
Indicates whether a predicate holds for all elements of this
NonEmptyArray
.Indicates whether a predicate holds for all elements of this
NonEmptyArray
.- p
the predicate used to test elements.
- returns
true
if the given predicatep
holds for all elements of thisNonEmptyArray
, otherwisefalse
.
- final def foreach(f: (T) => Unit): Unit
Applies a function
f
to all elements of thisNonEmptyArray
.Applies a function
f
to all elements of thisNonEmptyArray
.- f
the function that is applied for its side-effect to every element. The result of function
f
is discarded.
- def getClass(): Class[_ <: AnyVal]
- Definition Classes
- AnyVal → Any
- final def groupBy[K](f: (T) => K)(implicit classTag: ClassTag[T]): Map[K, NonEmptyArray[T]]
Partitions this
NonEmptyArray
into a map ofNonEmptyArray
s according to some discriminator function.Partitions this
NonEmptyArray
into a map ofNonEmptyArray
s according to some discriminator function.- K
the type of keys returned by the discriminator function.
- f
the discriminator function.
- returns
A map from keys to
NonEmptyArray
s such that the following invariant holds:(nonEmptyArray.toArray partition f)(k) = xs filter (x => f(x) == k)
That is, every keyk
is bound to aNonEmptyArray
of those elementsx
for whichf(x)
equalsk
.
- final def grouped(size: Int)(implicit classTag: ClassTag[T]): Iterator[NonEmptyArray[T]]
Partitions elements into fixed size
NonEmptyArray
s.Partitions elements into fixed size
NonEmptyArray
s.- size
the number of elements per group
- returns
An iterator producing
NonEmptyArray
s of sizesize
, except the last will be truncated if the elements don't divide evenly.
- final def hasDefiniteSize: Boolean
Returns
true
to indicate thisNonEmptyArray
has a definite size, since allNonEmptyArray
s are strict collections. - final def head: T
Selects the first element of this
NonEmptyArray
.Selects the first element of this
NonEmptyArray
.- returns
the first element of this
NonEmptyArray
.
- final def headOption: Option[T]
Selects the first element of this
NonEmptyArray
and returns it wrapped in aSome
.Selects the first element of this
NonEmptyArray
and returns it wrapped in aSome
.- returns
the first element of this
NonEmptyArray
, wrapped in aSome
.
- final def indexOf(elem: T, from: Int): Int
Finds index of first occurrence of some value in this
NonEmptyArray
after or at some start index.Finds index of first occurrence of some value in this
NonEmptyArray
after or at some start index.- elem
the element value to search for.
- from
the start index
- returns
the index
>=
from
of the first element of thisNonEmptyArray
that is equal (as determined by==
) toelem
, or-1
, if none exists.
- final def indexOf(elem: T): Int
Finds index of first occurrence of some value in this
NonEmptyArray
.Finds index of first occurrence of some value in this
NonEmptyArray
.- elem
the element value to search for.
- returns
the index of the first element of this
NonEmptyArray
that is equal (as determined by==
) toelem
, or-1
, if none exists.
- final def indexOfSlice[U >: T](that: NonEmptyArray[U], from: Int): Int
Finds first index after or at a start index where this
NonEmptyArray
contains a givenNonEmptyArray
as a slice.Finds first index after or at a start index where this
NonEmptyArray
contains a givenNonEmptyArray
as a slice.- that
the
NonEmptyArray
defining the slice to look for- from
the start index
- returns
the first index
>=
from
such that the elements of thisNonEmptyArray
starting at this index match the elements ofNonEmptyArray
that
, or-1
of no such subsequence exists.
- final def indexOfSlice[U >: T](that: Every[U], from: Int): Int
Finds first index after or at a start index where this
NonEmptyArray
contains a givenEvery
as a slice.Finds first index after or at a start index where this
NonEmptyArray
contains a givenEvery
as a slice.- that
the
Every
defining the slice to look for- from
the start index
- returns
the first index
>=
from
such that the elements of thisNonEmptyArray
starting at this index match the elements ofEvery
that
, or-1
of no such subsequence exists.
- final def indexOfSlice[U >: T](that: NonEmptyArray[U]): Int
Finds first index where this
NonEmptyArray
contains a givenNonEmptyArray
as a slice.Finds first index where this
NonEmptyArray
contains a givenNonEmptyArray
as a slice.- that
the
NonEmptyArray
defining the slice to look for- returns
the first index such that the elements of this
NonEmptyArray
starting at this index match the elements ofNonEmptyArray
that
, or-1
of no such subsequence exists.
- final def indexOfSlice[U >: T](that: Every[U]): Int
Finds first index where this
NonEmptyArray
contains a givenEvery
as a slice.Finds first index where this
NonEmptyArray
contains a givenEvery
as a slice.- that
the
Every
defining the slice to look for- returns
the first index such that the elements of this
NonEmptyArray
starting at this index match the elements ofEvery
that
, or-1
of no such subsequence exists.
- final def indexOfSlice[U >: T](that: GenSeq[U], from: Int): Int
Finds first index after or at a start index where this
NonEmptyArray
contains a givenGenSeq
as a slice.Finds first index after or at a start index where this
NonEmptyArray
contains a givenGenSeq
as a slice.- that
the
GenSeq
defining the slice to look for- from
the start index
- returns
the first index
>=
from
at which the elements of thisNonEmptyArray
starting at that index match the elements ofGenSeq
that
, or-1
of no such subsequence exists.
- final def indexOfSlice[U >: T](that: GenSeq[U]): Int
Finds first index where this
NonEmptyArray
contains a givenGenSeq
as a slice.Finds first index where this
NonEmptyArray
contains a givenGenSeq
as a slice.- that
the
GenSeq
defining the slice to look for- returns
the first index at which the elements of this
NonEmptyArray
starting at that index match the elements ofGenSeq
that
, or-1
of no such subsequence exists.
- final def indexWhere(p: (T) => Boolean, from: Int): Int
Finds index of the first element satisfying some predicate after or at some start index.
Finds index of the first element satisfying some predicate after or at some start index.
- p
the predicate used to test elements.
- from
the start index
- returns
the index
>=
from
of the first element of thisNonEmptyArray
that satisfies the predicatep
, or-1
, if none exists.
- final def indexWhere(p: (T) => Boolean): Int
Finds index of the first element satisfying some predicate.
Finds index of the first element satisfying some predicate.
- p
the predicate used to test elements.
- returns
the index of the first element of this
NonEmptyArray
that satisfies the predicatep
, or-1
, if none exists.
- final def indices: Range
Produces the range of all indices of this
NonEmptyArray
.Produces the range of all indices of this
NonEmptyArray
.- returns
a
Range
value from0
to one less than the length of thisNonEmptyArray
.
- final def isDefinedAt(idx: Int): Boolean
Tests whether this
NonEmptyArray
contains given index.Tests whether this
NonEmptyArray
contains given index.- idx
the index to test
- returns
true if this
NonEmptyArray
contains an element at positionidx
,false
otherwise.
- final def isEmpty: Boolean
Returns
false
to indicate thisNonEmptyArray
, like allNonEmptyArray
s, is non-empty.Returns
false
to indicate thisNonEmptyArray
, like allNonEmptyArray
s, is non-empty.- returns
false
- final def isInstanceOf[T0]: Boolean
- Definition Classes
- Any
- final def isTraversableAgain: Boolean
Returns
true
to indicate thisNonEmptyArray
, like allNonEmptyArray
s, can be traversed repeatedly.Returns
true
to indicate thisNonEmptyArray
, like allNonEmptyArray
s, can be traversed repeatedly.- returns
true
- final def iterator: Iterator[T]
Creates and returns a new iterator over all elements contained in this
NonEmptyArray
.Creates and returns a new iterator over all elements contained in this
NonEmptyArray
.- returns
the new iterator
- final def last: T
Selects the last element of this
NonEmptyArray
.Selects the last element of this
NonEmptyArray
.- returns
the last element of this
NonEmptyArray
.
- final def lastIndexOf(elem: T, end: Int): Int
Finds the index of the last occurrence of some value in this
NonEmptyArray
before or at a givenend
index.Finds the index of the last occurrence of some value in this
NonEmptyArray
before or at a givenend
index.- elem
the element value to search for.
- end
the end index.
- returns
the index
>=
end
of the last element of thisNonEmptyArray
that is equal (as determined by==
) toelem
, or-1
, if none exists.
- final def lastIndexOf(elem: T): Int
Finds the index of the last occurrence of some value in this
NonEmptyArray
.Finds the index of the last occurrence of some value in this
NonEmptyArray
.- elem
the element value to search for.
- returns
the index of the last element of this
NonEmptyArray
that is equal (as determined by==
) toelem
, or-1
, if none exists.
- final def lastIndexOfSlice[U >: T](that: NonEmptyArray[U], end: Int): Int
Finds the last index before or at a given end index where this
NonEmptyArray
contains a givenNonEmptyArray
as a slice.Finds the last index before or at a given end index where this
NonEmptyArray
contains a givenNonEmptyArray
as a slice.- that
the
NonEmptyArray
defining the slice to look for- end
the end index
- returns
the last index
>=
end
at which the elements of thisNonEmptyArray
starting at that index match the elements ofNonEmptyArray
that
, or-1
of no such subsequence exists.
- final def lastIndexOfSlice[U >: T](that: Every[U], end: Int): Int
Finds the last index before or at a given end index where this
NonEmptyArray
contains a givenEvery
as a slice.Finds the last index before or at a given end index where this
NonEmptyArray
contains a givenEvery
as a slice.- that
the
Every
defining the slice to look for- end
the end index
- returns
the last index
>=
end
at which the elements of thisNonEmptyArray
starting at that index match the elements ofEvery
that
, or-1
of no such subsequence exists.
- final def lastIndexOfSlice[U >: T](that: NonEmptyArray[U]): Int
Finds the last index where this
NonEmptyArray
contains a givenNonEmptyArray
as a slice.Finds the last index where this
NonEmptyArray
contains a givenNonEmptyArray
as a slice.- that
the
NonEmptyArray
defining the slice to look for- returns
the last index at which the elements of this
NonEmptyArray
starting at that index match the elements ofNonEmptyArray
that
, or-1
of no such subsequence exists.
- final def lastIndexOfSlice[U >: T](that: Every[U]): Int
Finds the last index where this
NonEmptyArray
contains a givenEvery
as a slice.Finds the last index where this
NonEmptyArray
contains a givenEvery
as a slice.- that
the
Every
defining the slice to look for- returns
the last index at which the elements of this
NonEmptyArray
starting at that index match the elements ofEvery
that
, or-1
of no such subsequence exists.
- final def lastIndexOfSlice[U >: T](that: GenSeq[U], end: Int): Int
Finds the last index before or at a given end index where this
NonEmptyArray
contains a givenGenSeq
as a slice.Finds the last index before or at a given end index where this
NonEmptyArray
contains a givenGenSeq
as a slice.- that
the
GenSeq
defining the slice to look for- end
the end index
- returns
the last index
>=
end
at which the elements of thisNonEmptyArray
starting at that index match the elements ofGenSeq
that
, or-1
of no such subsequence exists.
- final def lastIndexOfSlice[U >: T](that: GenSeq[U]): Int
Finds the last index where this
NonEmptyArray
contains a givenGenSeq
as a slice.Finds the last index where this
NonEmptyArray
contains a givenGenSeq
as a slice.- that
the
GenSeq
defining the slice to look for- returns
the last index at which the elements of this
NonEmptyArray
starting at that index match the elements ofGenSeq
that
, or-1
of no such subsequence exists.
- final def lastIndexWhere(p: (T) => Boolean, end: Int): Int
Finds index of last element satisfying some predicate before or at given end index.
Finds index of last element satisfying some predicate before or at given end index.
- p
the predicate used to test elements.
- end
the end index
- returns
the index
>=
end
of the last element of thisNonEmptyArray
that satisfies the predicatep
, or-1
, if none exists.
- final def lastIndexWhere(p: (T) => Boolean): Int
Finds index of last element satisfying some predicate.
Finds index of last element satisfying some predicate.
- p
the predicate used to test elements.
- returns
the index of the last element of this
NonEmptyArray
that satisfies the predicatep
, or-1
, if none exists.
- final def lastOption: Option[T]
Returns the last element of this
NonEmptyArray
, wrapped in aSome
.Returns the last element of this
NonEmptyArray
, wrapped in aSome
.- returns
the last element, wrapped in a
Some
.
- final def length: Int
The length of this
NonEmptyArray
.The length of this
NonEmptyArray
.Note:
length
andsize
yield the same result, which will be>
= 1.- returns
the number of elements in this
NonEmptyArray
.
- final def lengthCompare(len: Int): Int
Compares the length of this
NonEmptyArray
to a test value.Compares the length of this
NonEmptyArray
to a test value.- len
the test value that gets compared with the length.
- returns
a value
x
wherex < 0 if this.length < len x == 0 if this.length == len x > 0 if this.length > len
- final def map[U](f: (T) => U)(implicit classTag: ClassTag[U]): NonEmptyArray[U]
Builds a new
NonEmptyArray
by applying a function to all elements of thisNonEmptyArray
.Builds a new
NonEmptyArray
by applying a function to all elements of thisNonEmptyArray
.- U
the element type of the returned
NonEmptyArray
.- f
the function to apply to each element.
- returns
a new
NonEmptyArray
resulting from applying the given functionf
to each element of thisNonEmptyArray
and collecting the results.
- final def max[U >: T](implicit cmp: Ordering[U]): T
Finds the largest element.
Finds the largest element.
- returns
the largest element of this
NonEmptyArray
.
- final def maxBy[U](f: (T) => U)(implicit cmp: Ordering[U]): T
Finds the largest result after applying the given function to every element.
Finds the largest result after applying the given function to every element.
- returns
the largest result of applying the given function to every element of this
NonEmptyArray
.
- final def min[U >: T](implicit cmp: Ordering[U]): T
Finds the smallest element.
Finds the smallest element.
- returns
the smallest element of this
NonEmptyArray
.
- final def minBy[U](f: (T) => U)(implicit cmp: Ordering[U]): T
Finds the smallest result after applying the given function to every element.
Finds the smallest result after applying the given function to every element.
- returns
the smallest result of applying the given function to every element of this
NonEmptyArray
.
- final def mkString(start: String, sep: String, end: String): String
Displays all elements of this
NonEmptyArray
in a string using start, end, and separator strings.Displays all elements of this
NonEmptyArray
in a string using start, end, and separator strings.- start
the starting string.
- sep
the separator string.
- end
the ending string.
- returns
a string representation of this
NonEmptyArray
. The resulting string begins with the stringstart
and ends with the stringend
. Inside, In the resulting string, the result of invokingtoString
on all elements of thisNonEmptyArray
are separated by the stringsep
.
- final def mkString(sep: String): String
Displays all elements of this
NonEmptyArray
in a string using a separator string.Displays all elements of this
NonEmptyArray
in a string using a separator string.- sep
the separator string
- returns
a string representation of this
NonEmptyArray
. In the resulting string, the result of invokingtoString
on all elements of thisNonEmptyArray
are separated by the stringsep
.
- final def mkString: String
Displays all elements of this
NonEmptyArray
in a string.Displays all elements of this
NonEmptyArray
in a string.- returns
a string representation of this
NonEmptyArray
. In the resulting string, the result of invokingtoString
on all elements of thisNonEmptyArray
follow each other without any separator string.
- final def nonEmpty: Boolean
Returns
true
to indicate thisNonEmptyArray
, like allNonEmptyArray
s, is non-empty.Returns
true
to indicate thisNonEmptyArray
, like allNonEmptyArray
s, is non-empty.- returns
true
- final def padTo[U >: T](len: Int, elem: U)(implicit classTag: ClassTag[U]): NonEmptyArray[U]
A copy of this
NonEmptyArray
with an element value appended until a given target length is reached.A copy of this
NonEmptyArray
with an element value appended until a given target length is reached.- len
the target length
- elem
he padding value
- returns
a new
NonEmptyArray
consisting of all elements of thisNonEmptyArray
followed by the minimal number of occurrences ofelem
so that the resultingNonEmptyArray
has a length of at leastlen
.
- final def patch[U >: T](from: Int, that: NonEmptyArray[U], replaced: Int)(implicit classTag: ClassTag[U]): NonEmptyArray[U]
Produces a new
NonEmptyArray
where a slice of elements in thisNonEmptyArray
is replaced by anotherNonEmptyArray
Produces a new
NonEmptyArray
where a slice of elements in thisNonEmptyArray
is replaced by anotherNonEmptyArray
- from
the index of the first replaced element
- that
the
NonEmptyArray
whose elements should replace a slice in thisNonEmptyArray
- replaced
the number of elements to drop in the original
NonEmptyArray
- final def permutations(implicit classTag: ClassTag[T]): Iterator[NonEmptyArray[T]]
Iterates over distinct permutations.
Iterates over distinct permutations.
Here's an example:
NonEmptyArray('a', 'b', 'b').permutations.toArray = Array(NonEmptyArray(a, b, b), NonEmptyArray(b, a, b), NonEmptyArray(b, b, a))
- returns
an iterator that traverses the distinct permutations of this
NonEmptyArray
.
- final def prefixLength(p: (T) => Boolean): Int
Returns the length of the longest prefix whose elements all satisfy some predicate.
Returns the length of the longest prefix whose elements all satisfy some predicate.
- p
the predicate used to test elements.
- returns
the length of the longest prefix of this
NonEmptyArray
such that every element of the segment satisfies the predicatep
.
- final def product[U >: T](implicit num: Numeric[U]): U
The result of multiplying all the elements of this
NonEmptyArray
.The result of multiplying all the elements of this
NonEmptyArray
.This method can be invoked for any
NonEmptyArray[T]
for which an implicitNumeric[T]
exists.- returns
the product of all elements
- final def reduce[U >: T](op: (U, U) => U): U
Reduces the elements of this
NonEmptyArray
using the specified associative binary operator.Reduces the elements of this
NonEmptyArray
using the specified associative binary operator.The order in which operations are performed on elements is unspecified and may be nondeterministic.
- U
a type parameter for the binary operator, a supertype of T.
- op
a binary operator that must be associative.
- returns
the result of applying reduce operator
op
between all the elements of thisNonEmptyArray
.
- final def reduceLeft[U >: T](op: (U, T) => U): U
Applies a binary operator to all elements of this
NonEmptyArray
, going left to right.Applies a binary operator to all elements of this
NonEmptyArray
, going left to right.- U
the result type of the binary operator.
- op
the binary operator.
- returns
the result of inserting
op
between consecutive elements of thisNonEmptyArray
, going left to right:op(...op(op(x_1, x_2), x_3), ..., x_n)
where x_{1}, ..., x_{n} are the elements of thisNonEmptyArray
.
- final def reduceLeftOption[U >: T](op: (U, T) => U): Option[U]
Applies a binary operator to all elements of this
NonEmptyArray
, going left to right, returning the result in aSome
.Applies a binary operator to all elements of this
NonEmptyArray
, going left to right, returning the result in aSome
.- U
the result type of the binary operator.
- op
the binary operator.
- returns
a
Some
containing the result ofreduceLeft(op)
- final def reduceOption[U >: T](op: (U, U) => U): Option[U]
- final def reduceRight[U >: T](op: (T, U) => U): U
Applies a binary operator to all elements of this
NonEmptyArray
, going right to left.Applies a binary operator to all elements of this
NonEmptyArray
, going right to left.- U
the result of the binary operator
- op
the binary operator
- returns
the result of inserting
op
between consecutive elements of thisNonEmptyArray
, going right to left:op(x_1, op(x_2, ... op(x_{n-1}, x_n)...))
where x_{1}, ..., x_{n} are the elements of thisNonEmptyArray
.
- final def reduceRightOption[U >: T](op: (T, U) => U): Option[U]
Applies a binary operator to all elements of this
NonEmptyArray
, going right to left, returning the result in aSome
.Applies a binary operator to all elements of this
NonEmptyArray
, going right to left, returning the result in aSome
.- U
the result of the binary operator
- op
the binary operator
- returns
a
Some
containing the result ofreduceRight(op)
- final def reverse: NonEmptyArray[T]
Returns new
NonEmptyArray
with elements in reverse order.Returns new
NonEmptyArray
with elements in reverse order.- returns
a new
NonEmptyArray
with all elements of thisNonEmptyArray
in reversed order.
- final def reverseIterator: Iterator[T]
An iterator yielding elements in reverse order.
An iterator yielding elements in reverse order.
Note:
nonEmptyArray.reverseIterator
is the same asnonEmptyArray.reverse.iterator
, but might be more efficient.- returns
an iterator yielding the elements of this
NonEmptyArray
in reversed order
- final def reverseMap[U](f: (T) => U)(implicit classTag: ClassTag[U]): NonEmptyArray[U]
Builds a new
NonEmptyArray
by applying a function to all elements of thisNonEmptyArray
and collecting the results in reverse order.Builds a new
NonEmptyArray
by applying a function to all elements of thisNonEmptyArray
and collecting the results in reverse order.Note:
nonEmptyArray.reverseMap(f)
is the same asnonEmptyArray.reverse.map(f)
, but might be more efficient.- U
the element type of the returned
NonEmptyArray
.- f
the function to apply to each element.
- returns
a new
NonEmptyArray
resulting from applying the given functionf
to each element of thisNonEmptyArray
and collecting the results in reverse order.
- final def sameElements[U >: T](that: NonEmptyArray[U]): Boolean
Checks if the given
NonEmptyArray
contains the same elements in the same order as thisNonEmptyArray
.Checks if the given
NonEmptyArray
contains the same elements in the same order as thisNonEmptyArray
.- that
the
NonEmptyArray
with which to compare- returns
true
, if both this and the givenNonEmptyArray
contain the same elements in the same order,false
otherwise.
- final def sameElements[U >: T](that: Every[U]): Boolean
Checks if the given
Every
contains the same elements in the same order as thisNonEmptyArray
.Checks if the given
Every
contains the same elements in the same order as thisNonEmptyArray
.- that
the
Every
with which to compare- returns
true
, if both this and the givenEvery
contain the same elements in the same order,false
otherwise.
- final def sameElements[U >: T](that: GenIterable[U]): Boolean
Checks if the given
GenIterable
contains the same elements in the same order as thisNonEmptyArray
.Checks if the given
GenIterable
contains the same elements in the same order as thisNonEmptyArray
.- that
the
GenIterable
with which to compare- returns
true
, if both thisNonEmptyArray
and the givenGenIterable
contain the same elements in the same order,false
otherwise.
- final def scan[U >: T](z: U)(op: (U, U) => U)(implicit classTag: ClassTag[U]): NonEmptyArray[U]
Computes a prefix scan of the elements of this
NonEmptyArray
.Computes a prefix scan of the elements of this
NonEmptyArray
.Note: The neutral element z may be applied more than once.
Here are some examples:
NonEmptyArray(1, 2, 3).scan(0)(_ + _) == NonEmptyArray(0, 1, 3, 6) NonEmptyArray(1, 2, 3).scan("z")(_ + _.toString) == NonEmptyArray("z", "z1", "z12", "z123")
- U
a type parameter for the binary operator, a supertype of T, and the type of the resulting
NonEmptyArray
.- z
a neutral element for the scan operation; may be added to the result an arbitrary number of times, and must not change the result (e.g.,
Nil
for list concatenation, 0 for addition, or 1 for multiplication.)- op
a binary operator that must be associative
- returns
a new
NonEmptyArray
containing the prefix scan of the elements in thisNonEmptyArray
- final def scanLeft[B](z: B)(op: (B, T) => B)(implicit classTag: ClassTag[B]): NonEmptyArray[B]
Produces a
NonEmptyArray
containing cumulative results of applying the operator going left to right.Produces a
NonEmptyArray
containing cumulative results of applying the operator going left to right.Here are some examples:
NonEmptyArray(1, 2, 3).scanLeft(0)(_ + _) == NonEmptyArray(0, 1, 3, 6) NonEmptyArray(1, 2, 3).scanLeft("z")(_ + _) == NonEmptyArray("z", "z1", "z12", "z123")
- B
the result type of the binary operator and type of the resulting
NonEmptyArray
- z
the start value.
- op
the binary operator.
- returns
a new
NonEmptyArray
containing the intermediate results of insertingop
between consecutive elements of thisNonEmptyArray
, going left to right, with the start value,z
, on the left.
- final def scanRight[B](z: B)(op: (T, B) => B)(implicit classTag: ClassTag[B]): NonEmptyArray[B]
Produces a
NonEmptyArray
containing cumulative results of applying the operator going right to left.Produces a
NonEmptyArray
containing cumulative results of applying the operator going right to left.Here are some examples:
NonEmptyArray(1, 2, 3).scanRight(0)(_ + _) == NonEmptyArray(6, 5, 3, 0) NonEmptyArray(1, 2, 3).scanRight("z")(_ + _) == NonEmptyArray("123z", "23z", "3z", "z")
- B
the result of the binary operator and type of the resulting
NonEmptyArray
- z
the start value
- op
the binary operator
- returns
a new
NonEmptyArray
containing the intermediate results of insertingop
between consecutive elements of thisNonEmptyArray
, going right to left, with the start value,z
, on the right.
- final def segmentLength(p: (T) => Boolean, from: Int): Int
Computes length of longest segment whose elements all satisfy some predicate.
Computes length of longest segment whose elements all satisfy some predicate.
- p
the predicate used to test elements.
- from
the index where the search starts.
- final def size: Int
The size of this
NonEmptyArray
.The size of this
NonEmptyArray
.Note:
length
andsize
yield the same result, which will be>
= 1.- returns
the number of elements in this
NonEmptyArray
.
- final def sliding(size: Int, step: Int)(implicit classTag: ClassTag[T]): Iterator[NonEmptyArray[T]]
Groups elements in fixed size blocks by passing a “sliding window” over them (as opposed to partitioning them, as is done in grouped.), moving the sliding window by a given
step
each time.Groups elements in fixed size blocks by passing a “sliding window” over them (as opposed to partitioning them, as is done in grouped.), moving the sliding window by a given
step
each time.- size
the number of elements per group
- step
the distance between the first elements of successive groups
- returns
an iterator producing
NonEmptyArray
s of sizesize
, except the last and the only element will be truncated if there are fewer elements thansize
.
- final def sliding(size: Int)(implicit classTag: ClassTag[T]): Iterator[NonEmptyArray[T]]
Groups elements in fixed size blocks by passing a “sliding window” over them (as opposed to partitioning them, as is done in grouped.)
Groups elements in fixed size blocks by passing a “sliding window” over them (as opposed to partitioning them, as is done in grouped.)
- size
the number of elements per group
- returns
an iterator producing
NonEmptyArray
s of sizesize
, except the last and the only element will be truncated if there are fewer elements thansize
.
- final def sortBy[U](f: (T) => U)(implicit ord: Ordering[U]): NonEmptyArray[T]
Sorts this
NonEmptyArray
according to theOrdering
of the result of applying the given function to every element.Sorts this
NonEmptyArray
according to theOrdering
of the result of applying the given function to every element.- U
the target type of the transformation
f
, and the type where theOrdering
ord
is defined.- f
the transformation function mapping elements to some other domain
U
.- ord
the ordering assumed on domain
U
.- returns
a
NonEmptyArray
consisting of the elements of thisNonEmptyArray
sorted according to theOrdering
wherex < y if ord.lt(f(x), f(y))
.
- final def sortWith(lt: (T, T) => Boolean): NonEmptyArray[T]
Sorts this
NonEmptyArray
according to a comparison function.Sorts this
NonEmptyArray
according to a comparison function.The sort is stable. That is, elements that are equal (as determined by
lt
) appear in the same order in the sortedNonEmptyArray
as in the original.- returns
a
NonEmptyArray
consisting of the elements of thisNonEmptyArray
sorted according to the comparison functionlt
.
- final def sorted[U >: T](implicit ord: Ordering[U], classTag: ClassTag[U]): NonEmptyArray[U]
Sorts this
NonEmptyArray
according to anOrdering
.Sorts this
NonEmptyArray
according to anOrdering
.The sort is stable. That is, elements that are equal (as determined by
lt
) appear in the same order in the sortedNonEmptyArray
as in the original.- ord
the
Ordering
to be used to compare elements.- returns
a
NonEmptyArray
consisting of the elements of thisNonEmptyArray
sorted according to the comparison functionlt
.
- final def startsWith[B](that: NonEmptyArray[B], offset: Int): Boolean
Indicates whether this
NonEmptyArray
starts with the givenNonEmptyArray
at the given index.Indicates whether this
NonEmptyArray
starts with the givenNonEmptyArray
at the given index.- that
the
NonEmptyArray
slice to look for in thisNonEmptyArray
- offset
the index at which this
NonEmptyArray
is searched.- returns
true
if thisNonEmptyArray
hasthat
as a slice at the indexoffset
,false
otherwise.
- final def startsWith[B](that: Every[B], offset: Int): Boolean
Indicates whether this
NonEmptyArray
starts with the givenEvery
at the given index.Indicates whether this
NonEmptyArray
starts with the givenEvery
at the given index.- that
the
Every
slice to look for in thisNonEmptyArray
- offset
the index at which this
NonEmptyArray
is searched.- returns
true
if thisNonEmptyArray
hasthat
as a slice at the indexoffset
,false
otherwise.
- final def startsWith[B](that: NonEmptyArray[B]): Boolean
Indicates whether this
NonEmptyArray
starts with the givenNonEmptyArray
.Indicates whether this
NonEmptyArray
starts with the givenNonEmptyArray
.- that
the
NonEmptyArray
to test- returns
true
if this collection hasthat
as a prefix,false
otherwise.
- final def startsWith[B](that: Every[B]): Boolean
Indicates whether this
NonEmptyArray
starts with the givenEvery
.Indicates whether this
NonEmptyArray
starts with the givenEvery
.- that
the
Every
to test- returns
true
if this collection hasthat
as a prefix,false
otherwise.
- final def startsWith[B](that: GenSeq[B], offset: Int): Boolean
Indicates whether this
NonEmptyArray
starts with the givenGenSeq
at the given index.Indicates whether this
NonEmptyArray
starts with the givenGenSeq
at the given index.- that
the
GenSeq
slice to look for in thisNonEmptyArray
- offset
the index at which this
NonEmptyArray
is searched.- returns
true
if thisNonEmptyArray
hasthat
as a slice at the indexoffset
,false
otherwise.
- final def startsWith[B](that: GenSeq[B]): Boolean
Indicates whether this
NonEmptyArray
starts with the givenGenSeq
.Indicates whether this
NonEmptyArray
starts with the givenGenSeq
.- that
the
GenSeq
slice to look for in thisNonEmptyArray
- returns
true
if thisNonEmptyArray
hasthat
as a prefix,false
otherwise.
- def stringPrefix: String
Returns
"NonEmptyArray"
, the prefix of this object'stoString
representation.Returns
"NonEmptyArray"
, the prefix of this object'stoString
representation.- returns
the string
"NonEmptyArray"
- final def sum[U >: T](implicit num: Numeric[U]): U
The result of summing all the elements of this
NonEmptyArray
.The result of summing all the elements of this
NonEmptyArray
.This method can be invoked for any
NonEmptyArray[T]
for which an implicitNumeric[T]
exists.- returns
the sum of all elements
- val toArray: Array[T]
- final def toBuffer[U >: T]: Buffer[U]
Converts this
NonEmptyArray
to a mutable buffer.Converts this
NonEmptyArray
to a mutable buffer.- returns
a buffer containing all elements of this
NonEmptyArray
.
- final def toIndexedSeq: IndexedSeq[T]
Converts this
NonEmptyArray
to an immutableIndexedSeq
.Converts this
NonEmptyArray
to an immutableIndexedSeq
.- returns
an immutable
IndexedSeq
containing all elements of thisNonEmptyArray
.
- final def toIterable: Iterable[T]
Converts this
NonEmptyArray
to an iterable collection.Converts this
NonEmptyArray
to an iterable collection.- returns
an
Iterable
containing all elements of thisNonEmptyArray
.
- final def toIterator: Iterator[T]
Returns an
Iterator
over the elements in thisNonEmptyArray
.Returns an
Iterator
over the elements in thisNonEmptyArray
.- returns
an
Iterator
containing all elements of thisNonEmptyArray
.
- final def toList[U >: T]: List[U]
Converts this
NonEmptyArray
to a list.Converts this
NonEmptyArray
to a list.- returns
a list containing all elements of this
NonEmptyArray
. AClassTag
must be available for the element type of thisNonEmptyArray
.
- final def toMap[K, V](implicit ev: <:<[T, (K, V)]): Map[K, V]
Converts this
NonEmptyArray
to a map.Converts this
NonEmptyArray
to a map.This method is unavailable unless the elements are members of
Tuple2
, each((K, V))
becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys.- returns
a map of type
immutable.Map[K, V]
containing all key/value pairs of type(K, V)
of thisNonEmptyArray
.
- final def toSeq: Seq[T]
Converts this
NonEmptyArray
to an immutableIndexedSeq
.Converts this
NonEmptyArray
to an immutableIndexedSeq
.- returns
an immutable
IndexedSeq
containing all elements of thisNonEmptyArray
.
- final def toSet[U >: T]: Set[U]
Converts this
NonEmptyArray
to a set.Converts this
NonEmptyArray
to a set.- returns
a set containing all elements of this
NonEmptyArray
.
- final def toStream: Stream[T]
Converts this
NonEmptyArray
to a stream.Converts this
NonEmptyArray
to a stream.- returns
a stream containing all elements of this
NonEmptyArray
.
- def toString(): String
Returns a string representation of this
NonEmptyArray
.Returns a string representation of this
NonEmptyArray
.- returns
the string
"NonEmptyArray"
followed by the result of invokingtoString
on thisNonEmptyArray
's elements, surrounded by parentheses.
- Definition Classes
- NonEmptyArray → Any
- final def toVector: Vector[T]
Converts this
NonEmptyArray
to aVector
.Converts this
NonEmptyArray
to aVector
.- returns
a
Vector
containing all elements of thisNonEmptyArray
.
- final def transpose[U](implicit ev: <:<[T, NonEmptyArray[U]], classTag: ClassTag[U]): NonEmptyArray[NonEmptyArray[U]]
- final def unzip[L, R](implicit asPair: (T) => (L, R), classTagL: ClassTag[L], classTagR: ClassTag[R]): (NonEmptyArray[L], NonEmptyArray[R])
Converts this
NonEmptyArray
of pairs into twoNonEmptyArray
s of the first and second half of each pair.Converts this
NonEmptyArray
of pairs into twoNonEmptyArray
s of the first and second half of each pair.- L
the type of the first half of the element pairs
- R
the type of the second half of the element pairs
- asPair
an implicit conversion that asserts that the element type of this
NonEmptyArray
is a pair.- returns
a pair of
NonEmptyArray
s, containing the first and second half, respectively, of each element pair of thisNonEmptyArray
.
- final def unzip3[L, M, R](implicit asTriple: (T) => (L, M, R), classTagL: ClassTag[L], classTagM: ClassTag[M], classTagR: ClassTag[R]): (NonEmptyArray[L], NonEmptyArray[M], NonEmptyArray[R])
Converts this
NonEmptyArray
of triples into threeNonEmptyArray
s of the first, second, and and third element of each triple.Converts this
NonEmptyArray
of triples into threeNonEmptyArray
s of the first, second, and and third element of each triple.- L
the type of the first member of the element triples
- R
the type of the third member of the element triples
- asTriple
an implicit conversion that asserts that the element type of this
NonEmptyArray
is a triple.- returns
a triple of
NonEmptyArray
s, containing the first, second, and third member, respectively, of each element triple of thisNonEmptyArray
.
- final def updated[U >: T](idx: Int, elem: U)(implicit classTag: ClassTag[U]): NonEmptyArray[U]
A copy of this
NonEmptyArray
with one single replaced element.A copy of this
NonEmptyArray
with one single replaced element.- idx
the position of the replacement
- elem
the replacing element
- returns
a copy of this
NonEmptyArray
with the element at positionidx
replaced byelem
.
- Exceptions thrown
IndexOutOfBoundsException
if the passed index is greater than or equal to the length of thisNonEmptyArray
- final def zipAll[O, U >: T](other: Iterable[O], thisElem: U, otherElem: O): NonEmptyArray[(U, O)]
Returns a
NonEmptyArray
formed from thisNonEmptyArray
and an iterable collection by combining corresponding elements in pairs.Returns a
NonEmptyArray
formed from thisNonEmptyArray
and an iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements will be used to extend the shorter collection to the length of the longer.- other
the
Iterable
providing the second half of each result pair- thisElem
the element to be used to fill up the result if this
NonEmptyArray
is shorter thanthat
Iterable
.- returns
a new
NonEmptyArray
containing pairs consisting of corresponding elements of thisNonEmptyArray
andthat
. The length of the returned collection is the maximum of the lengths of thisNonEmptyArray
andthat
. If thisNonEmptyArray
is shorter thanthat
,thisElem
values are used to pad the result. Ifthat
is shorter than thisNonEmptyArray
,thatElem
values are used to pad the result.
- final def zipWithIndex: NonEmptyArray[(T, Int)]
Zips this
NonEmptyArray
with its indices.Zips this
NonEmptyArray
with its indices.- returns
A new
NonEmptyArray
containing pairs consisting of all elements of thisNonEmptyArray
paired with their index. Indices start at 0.